M1111型β探測器

The M1111 β detector

M1111型β探測器能夠測量低能β射線，因其優異的抗力，能夠廣泛用于環境檢測、精密測量、科研等領域。本公司研發的M1111型β探測器主要由端窗光電倍增管、高壓電源模塊、信號成形電路、閃爍體等組成。

本產品具有簡單方便、可靠性高及探測效率高等優點。在出廠前，已經過各項性能測試，接通電源，將輸出端與計數單元連接即可使用。

M1111 β detector can measure low energy β ray, because of its excellent anti-interference ability, can be widely used in environmental detection, precision measurement, scientific research and other fields. The M1111 β detector is mainly composed of photomultiplier, high voltage power supply module, signal forming circuit and scintillator . 

The product has the advantages of simplicity, high reliability and high detection efficiency.  Before leaving the factory, it has been tested in all aspects, connected to the power supply, the output end can be used with the counting unit.

技術參數

（測試環境溫度25℃）

注：

1) 使用60μCi的¹⁴C源測試，源距離探測器3mm。

2) 1小時不穩定性測試過程：探測器采集的計數率在10.0±0.5ks-1，設置每個數據采集時間為4min，每組數據累積采集15個數據（1小時），計算每組數據的各個值與均值的偏差的值，連續測試3組（3小時），取3組中的值為1小時工作不穩定性測試值。

產品應用

環境監測       Pollution monitoring

精密測量       Precise measurement

外形尺寸圖