三氯乙烯Cl2C=CHCl氣體測毒管134SB TRICHLOROETHYLENE 0.2-36.8ppm

1. PERFORMANCE
1） Measuring range ：1-16 ppm 0.2-3.2 ppm
Number of pump strokes 1（100ml） 4（400ml）
2） Sampling time ：1.5 minutes/1 pump stroke
3） Detectable limit ：0.1 ppm（400ml）
4） Shelf life ：1 year （Necessary to store in a refrigerated place ; 0～10℃）
5） Operating temperature ：0～40℃
6） Reading ：Direct reading from the scale calibrated by 1 pump stroke
7） Colour change ：Pale orange→Blueish purple
2. RELATIVE STANDARD DEVIATION
RSD-low：10％　RSD-mid.：10％　RSD-high：10％
3. CHEMICAL REACTION
By reacting with an Oxidizer, Hydrogen chloride is produced and PH indicator is discoloured.
CI2C＝CHCI＋PbO2＋H2SO4→HCI
4. CALIBRATION OF THE TUBE
GAS CHROMATOGRAPHY
5. INTERFERENCE AND CROSS SENSITIVITY
GAS
To pump
OXIDIZER
（White）
16
12
14
10
8
6
4
2 1
1000ml
ppm
Tube No.
134SB TRICHLOROETHYLENE
Substance Interference ppm Coexistence
Tetrachloroethylene FIG.1 Similar stain is produced. 2 Higher readings are given.
1,2-Dichloroethylene FIG.2 〃2 〃
Hydrogen chloride 〃2 〃
Vinyl chloride 〃40 〃
0
15
Tetrachloroethylene〔ppm〕?
FIG.1 Influence of Tetrachloroethulene
Trichloroethylene indicating value 〔ppm〕
10
10
5
5
Coexistence
Interference
0
15
1,2-Dichloroethylene〔ppm〕?
FIG.2 Influence of 1,2-Dichloroethylene
Trichloroethylene indicating value 〔ppm〕
40
10
20
5
Coexistence
Interference
（NOTE）
In case of 4 pump strokes, following formula is available for the actual concentration.
Actual concentration＝1/5×Reading value.