TIVM1光隔離探頭The Tektronix TIVM and TIVH Series IsoVu™ Measurement Systems offer galvanically isolated measurement solutions for accurately resolving high bandwidth, differential signals up to ±2500 V in the presence of large common mode voltages with the best in class common mode rejection performance across its bandwidth.

P6015A 75 MHz 100 M? || 3 pF 20 kV 在線(xiàn)購(gòu)買(mǎi) US $2,550

TIVH02 200 MHz ± 2500 V ≤ 60 kV DC：> 160 dB 100 MHz：100 dB 200 MHz：100 dB 3 米 - US $15,400

TIVH02L 200 MHz ± 2500 V ≤ 60 kV DC：> 160 dB 100 MHz：100 dB 200 MHz：100 dB 10 米 - US $16,600

TIVH05 500 MHz ± 2500 V ≤ 60 kV DC：> 160 dB 100 MHz：100 dB 500 MHz：80 dB 3 米 - US $21,300

TIVH05L 500 MHz ± 2500 V ≤ 60 kV DC：> 160 dB 100 MHz：100 dB 500 MHz：80 dB 10 米 - US $22,500

Product Description

The TIVM and TIVH Series (IsoVu) products can be used on most Tektronix oscilloscopes with the TekVPI interface and on MSO/DPO70K series oscilloscopes with the TCA-VPI50 adapter. IsoVu utilizes an electro-optic sensor that converts the electrical signal from the sensor tip cables to an optical signal, which electrically isolates the device-under-test from the oscilloscope. IsoVu incorporates four separate lasers, an optical sensor, five optical fibers, and sophisticated feedback and control techniques. The sensor head, which connects to the test point, has complete electrical isolation and is powered over one of the optical fibers (No batteries required). IsoVu is an ideal solution for users making the following measurements:

TIVM1光隔離探頭

TIVM Series attenuation, Differential input voltage range, Offset range, Differential impedance (Typical)

Use only the sensor tip cables listed below with the TIVM Series.