化工儀器網
詳細介紹
TS7121屏蔽射頻測試盒
使用屏蔽的射頻盒是可靠地測試無線電接口的先決條件。這是確保dut不受其他外部測試系統干擾影響的方法，這將扭曲測量結果，并防止其他外部?jī)x器或測試系統受到無線電接口測試的影響。為了滿足這些要求，一個測試箱必須提供高的屏蔽效能，良好的天線耦合系數，以及可重復的結果的堅固的機械設計。
為滿足自動生產線的要求，研發了R&S TS7121射頻測試箱。這些包括長期使用壽命，堅固的設計和自動打開和關閉射頻盒。高屏蔽效能在寬頻率范圍、射頻測試盒子上執行測試模塊和無線接口的設備按照多種標準如ISM、GSM / CDMA2000®/ WCDMA,藍牙®,ZigBee®,WiMAX™,WIFI和LTE。
TS7121屏蔽射頻測試盒
關鍵的事實
寬頻率范圍從300mhz到6ghz。
堅固耐用，經久耐用。
高的屏蔽效能
低反射由于使用吸水材料。
集成射頻連接器和濾料。
自動和手動操作的版本。
各種技術的天線耦合器。
特性和好處
堅固耐用的機械設計，經久耐用。
研磨的外殼確保了可再生的射頻特性。
可選的吸收器減輕了射頻測試箱內壁的反射。
具有相同射頻特性的手動和自動版本。
可交換的連接器板，用于定制配置。
特定于應用程序配置的不同選項。
用于DUT控制的饋通濾波器。
各種技術的天線耦合器。
Specifications
| Shielded RF test boxes | R&S®TS7121 |
| RF shielding effectiveness 1) | |
| 300 MHz to 3 GHz | >70 dB (typ.) |
| 1 GHz to 2.5 GHz | >75 dB (typ.) |
| 2.5 GHz to 4 GHz | >60 dB (typ.) |
| Interfaces | |
| Compressed air (grease-free) | 4 bar to 8 bar (automatic version only) |
| Control of pneumatic system | 25-contact, D-Sub (m), 24 V |
| Exchangeable connector plate with feedthrough filter | 80 mm × 90 mm (3.15 in × 3.54 in) |
| 1 × 25, 1 × 9-contact feedthrough filter | D-Sub female (on outside of case), D-Sub male (on inside of case) 3 MHz (3 dB) cut-off frequency, 100 V (1 A) DC voltage, 100 V (0.3 A) AC voltage |
| RF feedthroughs | 4 x N female (on outside of case) to SMA female (on inside of case), 0 MHz to 12.4 GHz |
| Temperature ranges | |
| Operating temperature range | +10 °C to +40 °C |
| Storage temperature range | –20 °C to +60 °C |
| Relative humidity | |
| Operation | 90 % relative humidity, non-condensating at +10 °C to +30 °C or 75 % relative humidity, non-condensating at +10 °C to +40 °C |
| Storage | 90 % relative humidity, non-condensating up to +60 °C |
| Dimensions (W × H × D) | |
| Outer dimensions (slide-in unit closed)2) | |
| Automatic version (with base plate) | 155 mm × 305 mm × 428 (600) mm (6.10 in × 12.00 in × 16.85 (23.62) in) |
| Manual version (with handle) | 155 mm × 305 mm × 498 mm (6.10 in × 12.00 in × 19.61 in) |
| Additional depth with slide-in unit fully extended | +210 mm (+8.27 in) |
| Inner dimensions (with absorber) | 87 mm × 130 mm × 354 mm (3.43 in × 5.12 in × 13.94 in) |
| Max. DUT dimensions (with absorber) | 80 mm × 130 mm × 193 mm (3.15 in × 5.12 in × 7.60 in) |
| Base plate of automatic version (W × D)BPL3) | 155 mm × 600 mm (6.10 in × 23.62 in) |
| Front supporting plate (with absorber) (W × D)FSPL3) | 80 mm × 200 (193) mm (3.15 in × 7.87 (7.60) in) |
| Rear supporting plate (with absorber)(W × D)FSPL3) | 80 mm ×175 (149) mm (3.15 in × 6.89 (5.87) in) |
| Max. opening of slide-in unit (with absorber) OSLU3) | 209 (195) mm (8.23 (7.68) in) |
| Weight (with absorber, without antenna) | approx. 25 kg (55.12 lb) |
| Shipping weight | approx. 32 kg (70.55 lb) |
| Options4) | |
| Antenna couplers | coupling coefficient typ. 10 dB to 20 dB5) |
| GSM/CDMA2000®/WCDMA (R&S®TS-F2x-G, R&S®TSF-23A-G, included in R&S®:TS-F21AGB) | 770 MHz to 1000 MHz, 1700 MHz to 2200 MHz |
| Bluetooth®/WLAN (b, g) (R&S®TS-F2x-B2, included in R&S®TS-F21AGB) | 2.4 GHz |
| ISM (R&S®TS-F2x-I4) | 315 MHz, 433 MHz to 434 MHz, 850 MHz to 950 MHz |
| Absorber | |
| Thickness | 26 mm (1.02 in) |
| Return loss | up to 1 GHz: <2 dB; 1 GHz to 2 GHz: 10 dB to 20 dB, from 2 GHz >20 dB |
| Proportion of shielding effectiveness | up to 1 GHz: approx. 5 dB; 0.8 GHz to 2 GHz: approx. 10 dB; from 2 GHz: approx. 15 dB |
| Feedthrough filter for USB up to 2.0 | yes |
| Outer dimensions (with side handle) | 155 (188) mm × 185 mm × 400 mm 6.10 (7.40) in × 7.28 in × 15.75 in |
| Inner dimensions (without absorber) | 128 mm × 170 mm × 373 mm 5.04 in × 6.69 in × 14.69 in |
| Inner dimensions (with absorber) | 76 mm × 144 mm × 321 mm 2.99 in × 5.67 in × 12.64 in |
| Effective additional inner height (with absorber) | 179 (153) mm (7.05 (6.02) in) |
1) With integrated absorber, when maintenance intervals are adhered to.
2) Without connectors on rear panel (> 20 mm (> 0.79 in), without lateral clamping levers (2 mm (0.08 in) × 30 mm (1.81 in)).
3) For location in test box, see figure "Side view of R&S®TS7121x RF shielded test boxes".
4) Feedthrough filter for fiber-optic link and compressed air on request.
5) Depending on DUT.
化工儀器網