PLC102型自動餾程測定儀

　適用標準：GB/T 6536 ASTM D86 GB/T255 GB/T7534 GB/T3146等 
產品說明：
    本儀器是集機械、光學、電子于一體的高科技產品，采用德國原裝測溫傳感器，自動控制蒸餾速率、回收體積，初餾點、干點自動檢測、大氣壓力自動檢測，結果自動計算，超溫可自動保護、自動滅火，量筒浴控溫范圍：0~60℃，電爐絲低電壓大電流供電，冷浴溫度：0~60℃；自動大氣壓力校正，可自動完成蒸鎦全過程實驗。廣泛應用于：
原油餾程測定、焦油餾程測定、汽油餾程測定、柴油餾程測定、石腦油餾程測定、洗油餾程測定、煤油餾程測定、燃料油餾程測定、重油餾程測定礦物油餾程測定、苯類餾程（沸程）測定、醇類餾程（沸程）測定、醚類餾程（沸程）測定等等需要蒸餾實驗的產品。
本儀器可由計算機監控（無線/有線通訊方式，由用戶選配）。
本儀器結構合理，性能穩定，操作簡單，是理想的分析檢測設備。

PLC102型自動餾程測定儀

主要技術指標：
　測溫范圍：室溫～400℃ 分辨率：0.1℃
　水浴恒溫范圍：0～60℃（進口壓縮機制冷）
　內部循環回收量筒周界溫度：5～50℃
　蒸餾速率：4～5ml/min
　體積檢測范圍：0～150ml 分辨率：0.1ml
　測溫元件：PT100（德國原裝測溫傳感器）
　顯示：640×480真彩色大屏幕漢字顯示
　加熱方式：紅外線輔射加熱
　打?。?0列漢字點陣打印
　消耗功率：小于 1kw
　制冷方式：壓縮機制冷（法國DANFOS）
　環境溫度：15～35℃
　操作方式：程序啟動，操作簡單

PLC102型自動餾程測定儀

主要特點：
　智能加熱管理系統，確保蒸餾速率符合實驗方法
　　要求。
　記錄點用戶自行設定：
　?、儆脩艨稍O(shè)定記錄對應溫度的回收體積
　　②用戶可設定記錄對應回收體積的溫度
　?、圩詣?dòng)記錄國標規定的記錄點
　四種實驗結束方式：
　?、俳K點結束：檢測到終餾點時結束實驗
　?、诟牲c(diǎn)結束：檢測到干點時結束實驗
　　③溫度結束：根據用戶設定的溫度值結束實驗，
　　　并打印輸出。
　?、荏w積結束：根據用戶設定的體積值結束實驗，
　　　并打印輸出。
  大氣壓力自動檢測
  超溫可自動保護、自動滅火

PLC102 Automatic Distillation Analyzer
Applicable standards: GB / T 6536 ASTM D86 GB/T255 GB/T7534 GB/T3146 etc.
Product Description:
    This instrument is a mechanical, optical, electronic high-tech products, using the German original temperature sensors, automatic control distillation rate, recycling volume, initial boiling point, dry point automatic detection, automatic detection of atmospheric pressure, the result is calculated automatically, ultra- Automatic temperature protection, automatic extinguishing cylinder bath temperature range: 0 ~ 60 ℃, electric wire low voltage and high current power supply, cooling bath temperature: 0 ~ 60 ℃; automatic barometric pressure correction, can automatically complete the whole process of distillation experiments. Widely used:
Determination of distillation range of crude oil, tar distillation range determination, gasoline boiling range determination, determination of distillation range of diesel, naphtha, distillation range determination, determination of distillation range of wash oil, kerosene distillation range determination, determination of distillation range of fuel oil, heavy oil distillation range determination of mineral oil distillation range determination, benzene distillation process (boiling range) measured alcohol distillation process (boiling range) determination, ethers Distillation (boiling range) Experimental determination of the distillation of products and so on need.
The instrument can be a computer monitor (wireless / wired communication, by users' choice).
This instrument is a reasonable structure, stable performance, simple operation, is an ideal detection equipment.
The main technical indicators:
Temperature range: room temperature ~ 400 ℃ Resolution: 0.1 ℃
Water bath range: 0 ~ 60 ℃ (Imported compressor refrigeration)
Internal recycling cylinder perimeter temperature: 5 ~ 50 ℃
Distilling rate: 4 ~ 5ml/min
Volumetric detection range: 0 ~ 150ml Resolution: 0.1ml
Temperature components: PT100 (German original temperature sensor)
Display: 640 × 480 true color large-screen display of Chinese characters
Heating: infrared radiated heat
Printing: 40 character dot matrix printing
Power consumption: less than 1kw
Cooling: Compressor cooling (France DANFOS)
Ambient temperature: 15 ~ 35 ℃
Mode of operation: the program starts, simple operation
Main features:
Inligent heat management system to ensure that the distillation rate is consistent with experimental methods
Requirements.
Users set their own record points:
① Users can set the volume corresponding to the record temperatures recycling
② user can set the temperature corresponding to the record volume recovery
③ automatically record GB prescribed record points
Four kinds of end of the experiment by:
① endpoint End: The end point is detected when the end of the experiment
② dry point End: end point detection experiments dry
③ Temperature End: According to the end user set temperature experiments,
And print output.
④ Volume End: According to the value of the end user to set the volume of the experiment,
And print output.
  Automatic detection of atmospheric pressure
  Automatic over-temperature protection, automatic fire extinguishing