中低壓反應釜套裝 NR-6000

釜體單層結構無底閥( 可以帶內襯)

5860050

NR-6000

反應釜套裝

SS

NR-6000 Set of basic reactor made of SS 316TI , volume 6800mL for usage with or without PTFE-lining.Includes reactor vessel with lid made of SS 316TI, O-seal ring (FPM,217x5,0mm), manual quick-lock closure ring, standard fittings( rupture disc made of Monel, 25bar, with rupture disc holder and vent valve,nominal width 4mm), two handles and connection ports for heating/cooling coil (2x 6mm connections),magnetic clutch RV-400 (1x M48 connection) as well as two 8mm swagelok connections

釜體單層結構帶底閥( 無內襯)

5860050

NR-6000

反應釜套裝

SS BV

NR-6000 Set of basic reactor made of SS 316TI , volume 6800mL for usage with bottom drain valve.Includes reactor vessel with lid made of SS 316TI, O-seal ring (FPM,217x5,0mm), manual quick-lock closure ring, standard fittings( rupture disc made of Monel, 25bar, with rupture disc holder and vent valve, nominal width 4mm), two handles and connection ports for heating/cooling coil (2x 6mm connections),magnetic clutch RV-400 (1x M48 connection), bottom drain valve as well as two 8mm swagelok connections.

釜體夾套結構無底閥( 可以帶內襯)

5860060

NR-6000

反應釜套裝

SS J

NR-6000 Set of basic reactor made of SS 316TI with jacket, volume 6800mL for usage with or without PTFE-lining.Includes reactor vessel with welded-on and isolated jacket for heating/cooling with circulation heater/cooler, lid made of SS 316TI, O-seal ring (FPM, 217x5,0mm), manual quick-lock closure ring, standard fittings( rupture disc made of Monel, 25bar, with rupture disc holder and vent valve,nominal width 4mm), two handles and connection ports for heating/cooling coil(2x 6mm connections),magnetic clutch RV-400 (1x M48 connection) as well as two 8mm swagelok connections.

釜體夾套結構帶底閥( 無內襯)

5860065

NR-6000

反應釜套裝

SS J BV

NR-6000 Set of basic reactor made of SS 316TI with jacket, volume 6800mL for usage with bottom drain valve.Includes reactor vessel with welded-on and isolated jacket for heating/cooling with Circulation heater/cooler, lid made of SS 316TI, O-seal ring (FPM,217x5,0mm), manual quicklock

closure ring, standard fittings( rupture disc made of Monel, 25bar, with rupture disc holder and vent valve,nominal width 4mm), two handles and connection ports for heating/cooling coil (2x 6mm connections),magnetic clutch RV-400 (1x M48 connection), bottom drain valve as well as two 8mm

swagelok connections.

釜體內襯

5860100

NR-6000 PTFE

內襯

NR-6000 PTFE-linig consisting of lid-lining, lining of dip-tube, PTFE O-Ring (197x5,0mm) and PTFE-insert (6000ml) (Working termperature Tmax > 230℃ )僅適合無底閥反應釜使用

通用附件

5727090

RV 100 磁耦軸承

Magnetic clutch RV 100/SS (torque 100 Ncm, 300 ℃ ,max. 4000 mPas (1.5 cP) at 10,000ml, made of SS) foruse with anchor stirrer made of SS 316 TI

5727400

RV-400 SS 磁耦軸承

Magnetic clutch RV 400 made of SS 316 TI with Reed contact, torque 400 Ncm, 300℃ , EX-proof zone 1

5945920

錨式攪拌漿，SS

Anchor stirrer made of SS 316 TI

5701017

PTFE 高壓泄壓管

PTFE High pressure tubing (2.5m; ID 9mm; 550bar)

Exhaust tubing for rupture discs, G3/8" female (inlet)-G 3/8" male (outlet)

5708198

O- 型圈

O-ring 157×4 mm made of Viton for reactors without PTFE-lining

5751455

爆破片 25bar

Rupture disc made of Monel, D 24mm, 25bar with PFA protection foil and certificate

其他可選配件、備用件

閥門

不同材質的底部排水閥及氧氣閥門可選

壓力測量

多型號壓力表和壓力傳感器可選

加熱/ 冷卻盤管

不銹鋼材質，另有帶PTFE涂層的盤管可選

磁耦合傳動軸堵頭

不銹鋼材質和帶PTFE涂層的不銹鋼堵頭可選

通用附件

高壓管路、泄壓閥、氧氣閥門、液體進樣、

加熱攪拌單元

多型號頂置式攪拌、攪拌槳、溫度控制器、加熱套、恒溫夾套、熱電偶傳感器可選

攪拌單元安裝附件

彈性聯軸器、電機固定架、磁耦合傳動軸等附件可選

升降支架

For a functioning configuration one lid fixation and one reactor fixation are needed beside the basic lift system.多型號整體升降支架可選，

O 型圈

O-Ring ，多材質可選

CR5706000

回流冷凝管

Reflux Condenser for NR-6000 DN50 600mm

CR5703001

Cooling Fin

Cooling Fin 600mm