克利夫蘭開口杯
自動開口閃點試驗儀
ACO-7 Asphalt Version
For bitumen & surface skin forming samples
適用于瀝青測試,帶同步撇膜裝置
Model ACO-7 Asphalt Version is a new addition to the latest version of the automated Cleveland Open Cup(COC) flash point tester from Tanaka. While maintaining the features of the regular ACO-7 flash point tester, a unique skimmer was added to automatically remove the surface skin that forms on the sample when bitumen or some other samples are tested. Surface skin removal has been known to improve the precision and the safety of the COC flash point testing of such samples, and some test methods including JIS recommend it
When this seventh generation automated flash point tester series was designed after 35 years of delivering the this product line to the petroleum industry, ease of operation and maintenance was sought.
ACO-7自動開口閃點試驗儀(Asphalt Version瀝青型)嚴格按照克利夫蘭開口杯法(COC)測試瀝青,柏油等石油產品的開口閃點。按照日本國家標準(JIS)對測試瀝青產品的要求,加裝了的同步撇膜裝置,可在閃點測試過程中,撇去樣品表面的油膜。儀器是“日本田中科學機器制作株式會社”第7代的自動閃點測試儀器,集“田中科學”35年自動閃點測試儀的制造經驗和當今測試技術于一身。操作簡單,功能完善,易于維護。
SINGLE ACTION SETTING: The flash detector rings, the temperature sensor and the skimmer are permanently mounted on a swing-arm assembly, which allows an easy setting of the specimen .儀器擺動式測試臂簡單實用,使用雙環形電極檢測閃點,溫度控制靈敏度高。樣品杯更換,拆
EASY OPERATION: Select a test mode and enter the expected flash point ; while the instrument executes the test, you are free to do other lab work. The tester follows the exact procedures prescribed in the test method, and the completion of the test cycle is signaled by beeps. The test result is brightly shown on the VFD module. 測試閃點只需預設閃點溫度,和對應的測試模式,儀器就嚴格按照試驗標準自動進行測試,無需人為干預。全微機控制,升溫和測試過程精確可靠,全數字顯示閃點溫度和點火次數。試驗結束,訊響提示,并自動風冷。一人可同時操作多臺儀器,有效的提高了人員效率。
AUTO FIRE POINT DETECTION: In addition to the flash point, fire point can be determined automatically. The fire point is detected when the double Ionization rings detects 5 sec of continuous burning. ACO-7還可以測試樣品的燃點。在燃點檢測模式下,儀器在檢測出閃點后再次連續點火試驗,直至樣品連續燃燒5秒鐘的溫度點,就是樣品的燃點。
AUTO FIRE CONTAINMENT: ACO-7 is equipped with a fire containment lid which activates automatically to help putting out fire when ACO-7 detects a fire point or specimen is burning up heavily. ACO-7配備有自動滅火蓋,簡單實用,可在測試樣品的燃點后自動滅火。作為儀器安全措施的一部分,自動滅火系統也有效的避免了測試中引起火災的意外情況。
DATA HANDLING: The unit is equipped to store up to 50 successive test results and export to an optional printer or to a LIMS through an RS232 port. 儀器可記錄zui后50 次的試驗數據,內置電池,即使關機數據也不會丟失。還可以通過RS-232外接打印機輸出,或同實驗室信息管理系統(LIMS)通訊,便于集中控制管理。
MODULAR DESIGN: The tester consists of a computer control unit and a test head unit, allowing remoy placing the test head unit up to 3 meters away. An optional Changeover unit can be purchased to attach the control unit to another type of flash point test head unit (APM-7 or ATG-7). The control unit is designed to control any type of the three different flash point test head unit, but one at a time. 儀器可分為控制部和測試部?jī)蓚€(gè)部分,控制部和測試部既能上下放置(減少設置面積)又能左右并排,兩者zui遠可通過3m長的電纜相連。全系列閃點測試儀器的控制部分可以通用,并可自動識別所連接的測試部,。配上CHG-7型切換器(選購件),1臺控制部可切換控制二臺測試部(APM-7型或ATG-7型)。
TANAKA Automated Cleveland Open Cup Flash Point Tester, model ACO-7 Asphalt Version
SPECIFICATIONS:
CONFORMING STANDARDS: (適用標準)
ISO 2592, ASTM D92, IP 36, GB/T 3536 etc.
MEASURING RANGE: (測試范圍)
Ambient to 400 ℃ ( 室溫 - 400℃)
TEST MODE: (測試模式)
ASTM D92 Flash + Fire, (閃點+燃點),
Special (Fast Search), (閃點快速搜尋,檢測預期閃點),
Skim, (撇膜模式)
User’s Custom (用戶自定義)
DISPLAY: (顯示)
Fluorescent display tube (VFD Module) VFD熒光顯示屏
TEMPERATUR SENSOR: 溫度控制
PT-100 in stainless steel sheath (不銹鋼護套PT-100傳感器)
FLASH DETECTOR: 閃點檢測
Ionization Ring環形電極(火焰離子檢測)
HEATER: 加熱功率
Nichrome Coil heater: 800W@100V or 800W@220V 鎳鉻合金加熱盤,加熱功率800 W
IGNITION SOURCE: 火焰測試
Gas ignition with automatic lighting燃?xì)恻c(diǎn)火測試。(帶自動點火,需要外接燃?xì)?。?/div>
SKIMMING MECHANISM:
Teflon Paddle rotates to skim the surface film off specimen. Skimming start temp. and interval are programmable. When not in use, the paddle can be removed.
COOLING DEVICE:
Forced air cooling by sirocco fan (試驗結束)強制風冷
BAROMETRIC CORRECTION: 氣壓補正
By entering the barometric pressure reading through the control panel, or by optional barometric pressure sensor可在儀器的設置面板中設定大氣壓力數值,儀器自動計算并補正zui終的試驗結果。或加裝氣壓檢測傳感器(選購件),儀器自動采集大氣壓力數值并計算補正試驗結果。
DATA OUTPUT: 數據輸出
RS-232C 1 channel (for PC or Optional Printer) RS-232C 接口,1,可連接電腦或打印機
SAFETY MECHANISM: (安全保護)
Fire containment lid which activates automatically to help putting out fire when ACO-7 detects a fire point Automatically shuts off and the problem is reported by buzzer and display, in case:
下列情況下,儀器自動關機,報警提示,并顯示相關出錯信息。燃點測試模式或意外火警時,自動滅火蓋能在*時間滅火動作:
(a) EFP+30℃ or at 400℃ is reached,
超過預期閃點值30 ℃未檢測出閃點,或超過了檢測范圍(400 ℃)時
(b) Temperature sensor is found defective, 溫度檢測傳感器出錯時
(c) Flash detector is found defective, 閃點檢測傳感器出錯時
(d) Thermofuse is blown (Also fire containment lid activates),
溫度保險絲熔斷或執行滅火動作時
(e) Built-in battery is found drained out, 內置電池失效時
(f) Arm is not set in place, or自動滅火蓋沒有回復在安全位置
(g) Control computer runs away (no display) 微處理器失效(無顯示)
DIMENSION & WEIGHT: (體積/重量)
控制部,Control unit: 230W x 455D x 110H (mm), 6.0kg
測試部,Test unit: 230W x 450D x 345H (mm), 14.5kg
INSTALLATION SITE: 環境要求
Ambient temperature: 0 to 40 ℃ 環境溫度 0 - 40 ℃
RH: Less than 90%(no condensation) 環境濕度 < 90% (無凝結)
UTILITY: POWER SUPPLY: 電源要求,訂購前說明
AC100/120V or 220/240V 50/60Hz (set at the factory) 1.0kW(max.)
GAS SUPPLY: (燃?xì)庖螅?/div>
LP gas or natural gas (Max. pressure<9.8kPa) 液化石油氣或者天然氣,壓力要求小于<9.8kPa
ORDERING INFORMATION:
STANDARD ACCESSORIES: (標準附件)
1 Test Cup Assembly 樣品杯,克利夫蘭開口杯 | 1pc |
2 Power Connecting Cable, 0.6m 電源連接線 | 1pc |
3 Signal Connecting Cable, 0.6m 信號連接線 | 1pc |
4 AC Power Cord, 3.0m ( | 1pc |
5 Thermal Insulation (Heating Plate) 隔熱片,保溫板 | 1pc |
6 Spare Thermofuse 溫度保險絲備件 | 3pcs |
7 Insulation tube for Thermofuse, 0.1m溫度保險絲護套管 | 1pc |
8 Spare Paddle 撇膜片備件 | 4pcs |
9 Gas Hose 9x16x1500mm 燃?xì)夤埽蛪汗?/div> | 1pc |
10 Gas Hose Band 管夾 | 2pcs |
11 Instruction Manual 使用說明書 | 1pc |
OPTIONAL ACCESSORIES: (選購件1)
Mercury Thermometer Holder for Calibration汞柱(水銀)壓力計(氣壓矯正用)
Power Connecting Cable, 3m加長電源連接線,3米
Signal Connecting Cable, 3m加長信號連接線,3米
Barometric Pressure Sensor大氣壓力檢測傳感器
Built-in Clock Board (for time/date verification) 內置時鐘板
Printer, BS2-80TS (we recommend that optional Built-in Clock Board be purchased with this Printer) 外接打印機 (推薦連同內置時鐘板一起使用,打印試驗的日期和結果)
Changeover Unit, Model: CHG-7測定部切換裝置,(一臺控制部手工切換控制多臺測定部)
SUGGESTED SPARES FOR 2 YEARS: (選購件2,2年維護)
1 Test Cup Assembly 樣品杯,開口油杯 | 1pc |
2 Igniter Top (Ignition Filament) 電子點火頭 | 2pcs |
3 Thermofuse (pack of 5, w/ insulating tube) 溫度保險絲(5個/包,帶護套) | 1pk |
4 Temperature Sensor 溫度傳感器 | 1pc |
5 Inner Detector Ring 閃點檢測環 (內圈,小環) | 1pc |
6 Outer Detector Ring 閃點檢測環 (外圈,大環) | 1pc |
7 Insulating Collar for Flash Detector 絕緣管座 | 2pcs |
8 Teflon Paddle 撇膜片 | 5pcs |
9 Nichrom Heater Coil 800W@100V or 800W@220V 加熱組件 | 1pc |