現貨 118-43極為柔韌，可移印，導電油墨
- 公司名稱 世聯博研（北京）科技有限公司
- 品牌 其他品牌
- 型號
- 產地
- 廠商性質 代理商
- 更新時間 2019/10/12 10:46:42
- 訪問次數 292
聯系方式：李勝亮18618101725 查看聯系方式
聯系我們時請說明是化工儀器網上看到的信息，謝謝!
細胞應力加載儀,3細胞打印機,NanoTweezer新型激光光鑷系統,PicoTwist磁鑷,美國NeuroIndx品牌Kuiqpick單細胞捕獲切割系統
| 產地類別 | 進口 | 應用領域 | 生物產業 |
|---|
現貨 118-43極為柔韌，可移印，導電油墨
說明：118-43是一種極為柔軟、可移印、導電油墨、涂料和粘合劑
適用于移印、浸漬和注射器配藥。本產品具有良好的附著力
卡普頓，聚酯薄膜，玻璃和其他各種表面。與傳統的導電材料不同，這種產品
抗彎曲和起皺。118-43的一些應用包括但不限于
聚酰亞胺撓性電路，聚合物厚膜電路，薄膜開關，表面電氣附件
鉭電容器的安裝裝置和陽極涂層。118-43是101-59的可移印版本。
典型固化特性：
稠度光滑膏
填充銀
銀含量，固化>84
抗皺性佳
體積電阻率（Ω-cm）0.000025
片電阻率（Ω/sq）0.01
玻璃化轉變溫度（℃）75
水解穩定性優異
有效溫度范圍（℃）-55至+200
熱穩定性（攝氏度）達到325
建議的處理和固化：118-43已準備好可供使用?？梢赃M(jìn)一步細化
加入少量cmi稀釋劑113-39（快干）或114-20緩凝劑（慢干）。在使用之前，
一定要把銀重新掛起來。對于大多數應用，在170℃下固化5-10分鐘可獲得性能。
通過在50°C至
180°C。建議終用戶通過實驗確定適合個人的溫度和時間
應用。
貯存期：25℃下保存12個月。
安全和操作：在通風良好的情況下使用。遠離火花和明火。避免長時間
接觸皮膚和吸入蒸汽。用肥皂和水清洗皮膚。
現貨 118-43極為柔韌，可移印，導電油墨
118-43
EXTREMELY FLEXIBLE, PAD-PRINTABLE, ELECTRICALLY CONDUCTIVE INK
DESCRIPTION: 118-43 is an extremely flexible, pad printable, electrically conductive ink, coating and adhesive
suitable for application by pad printing, dipping and syringe dispensing. This product features excellent adhesion to
Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very
resistant to flexing and creasing. Some applications for 118-43 include, but are not limited to, emi/rfi shielding of
polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface
mounted devices, and anode coatings for tantalum capacitors. 118-43 is a pad-printable version of 101-59.
TYPICAL CURED PROPERTIES:
Consistency Smooth Paste
Filler Silver
Percent Silver, cured > 84
Crease Resistance Excellent
Volume Resistivity (Ω-cm) 0.000025
Sheet Resistivity (Ω/sq) 0.01
Glass Transition Temperature (°C) 75
Hydrolytic Stability Excellent
Useful Temperature Range (°C) -55 to +200
Thermal Stability (°C) Good to 325
SUGGESTED HANDLING & CURING: 118-43 is ready to use as supplied. Further thinning may be accomplished
by adding small amounts of CMI Thinners #113-39 (fast drying), or 114-20 Retarder (slow drying). Prior to using,
be certain to re-suspend silver. Best properties, for most applications, result when cured for 5-10 minutes at 170°C.
Good properties are obtained on a variety of substrates by dry and curing at temperatures ranging from 50°C to
180°C. End user is advised to experimentally determine temperature and time best suited for individual
applications.
STORAGE: Shelf Life: 12 months at 25°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged
contact with skin and breathing of vapors. Wash with soap and water to remove from skin.
采購中心
化工儀器網