上海薩帛機電設備有限公司，價格優勢！
：彭  
:（直線） :
詢價發：sales@sahbore.com、
傳真
地址：中國（上海）自由貿易試驗區楊高北路536號樂非天地大廈6層
詢價請?zhí)峁ㄆ放?型號+數量+公司全稱/）及圖片信息。我們會盡快做出回復 。
優價銷售：
Conesys EUROPE    MS3470W14-12P    接頭

我司除供應Conesys產品外，亦優價銷售如下列表型號：

Dr. F?disch 
Umweltmesstechnik AG
Zwenkauer Stra?e 159, D-04420 Markranst?dt
T. +49-34205-755-0, F. +49-34205-755-40
www.foedisch.de
1
Price List for PFM 
Dust measuring devices Dr. F?disch Umweltmesstechnik AG 
Valid from 01.01.2012 to 31.12.2012 
Type of device 
List Price / unit 
(€) 
Particle Flow Meter PFM 92 C*) 
*) validated by authorities for continuous dust emission control
according to TA Luft 
consisting of: 
Measuring probe 
Probe length: 100 - 500 mm (standard 300 mm) 
(others on request) 
Material:  stainless steel 
Connection:   assembly by means of snap closure 
Output:   4 ... 20 mA 
Limit value switches 
4 measuring ranges for an optimum adaptation to the 
respective dust concentration range 
Power: 24 V DC , 110 VAC or 230 V AC 50 Hz 
Manual (English) 
1.890,00 
Particle Flow Meter PFM 02*) 
*) approved as suitability-tested measuring device for the 
continuous dust emission control according to TA Luft 
consisting of: 
probe with integrated display and control unit in the probe’s 
head 
Probe length: 300 mm (standard) 
(others on request) 
Material:  stainless steel, insulated 
Connection:  1"-socket 
Output:   4 ... 20 mA 
Limit value switches 
4 measuring ranges 
numerical or graphic presentation on the display 
Power:   24 V DC , 110 VAC or 230 V AC
Manual (English) 
2.620,00 
Dr. F?disch 
Umweltmesstechnik AG
Zwenkauer Stra?e 159, D-04420 Markranst?dt
T. +49-34205-755-0, F. +49-34205-755-40
www.foedisch.de
2
Particle Flow Meter PFM 02 Ex*) 
*) approval as measuring device for continuous dust 
measurement in area ExII 1/3D IP65 T 74°C 
 ExII 3G Ex nA IIC T4  consisting of: 
probe with integrated display and control unit in the probe’s 
head 
-  length: 300 mm trapezoidal profile (standard) 
-  Material: stainless steel, insulated 
-  2 integrated limit value switches, signal threshold adjustable 
-  4 amplification stages for an optimum adaptation to the dust 
concentration range 
-  voltage: 24 V DC 
-  output: 4...20  mA,  potential-separated
3.120,00 
filter diagnosis unit PFM 92K 
installed in a case 
consisting of: 
Probe with preamplifier 
Probe length: 50 mm up to 500 mm 
Material : stainless steel 
Connection cable 5 m 
Control unit 
with serial interface (RS 232) 
4 measuring ranges for an optimum adaptation to the 
respective dust concentration range 
Electronic recorder inside the case 
126 mm graphic display with pulldown-menus and quicksetup 
3 analog inputs 
3 ?" – disc 
software ReadWin 
Manual (English) 
6.100,00 
Dr. F?disch 
Umweltmesstechnik AG
Zwenkauer Stra?e 159, D-04420 Markranst?dt
T. +49-34205-755-0, F. +49-34205-755-40
www.foedisch.de
3
Particle Flow Meter PFM 02V*) 
*) approved as suitability-tested measuring device for the
continuous dust emission control according to TI Air 
with velocity compensation applicable in case of velocity 
alterations ?+/- 10% 
consisting of: 
probe with integrated display and control unit in the probe’s 
head 
Probe length: 300 mm (standard) 
Material:  stainless steel, insulated 
Connection:  1"-socket 
Output:   4 ... 20 mA 
Limit value switches 
4 measuring ranges 
numerical or graphic presentation on the display 
analogue input (4…20 mA) for recording a signal in 
proportion to the velocity 
analogue output (4…20 mA) for the output of the velocity 
calculated out of the velocity-proportional signal in the 
channel 
velocity compensation of the dust signal possible 
Power:   24 V DC , 110/230 VAC 50Hz 
Manual (English) 
6.120,00 
Dr. F?disch 
Umweltmesstechnik AG
Zwenkauer Stra?e 159, D-04420 Markranst?dt
T. +49-34205-755-0, F. +49-34205-755-40
www.foedisch.de
4
Flow Measuring Device FMD 02 
(suitable for combination with PFM 02 V) 
for gas velocities > 3 m/s 
- dynamic pressure probe 
material: 1.4571 
(standard - ) installation length: 500 mm 
- Differential pressure transducer 0-10 mbar linear 
- weld-in flange 1“ 
- Signal output 4 ... 20 mA 
- voltage supply: 24 V DC, 110/230 VAC 50Hz 
2.160,00 
Flow Measuring Device FMD 09 
approved as measuring deviceaccording to TI Air, 13
th
, 17
th
and 
27
th
BImSchV 
for measurement of velocity or flow for gas velocities > 5 m/s 
consisting of: 
Assembly flange with special flange DN 80 PN 6 
(standard length 200mm, inner diameter 100 mm 
standard material stainless steel)  
Dynamic pressure probe 
material: 1.4571 
(standard) insertion length into the stack: approx. 500 mm 
differential pressure transmitter 
weld-in flange DN 80 PN 6 
ball valves 
signal output 4 … 20 mA 
for velocity / flow; temperature 
voltage supply: 24 V DC, 230 VAC 
mounted in a weather protection case (made of GRP) 
5.370,00 
Dr. F?disch 
Umweltmesstechnik AG
Zwenkauer Stra?e 159, D-04420 Markranst?dt
T. +49-34205-755-0, F. +49-34205-755-40
www.foedisch.de
5
Dust Measuring Device PFM 97 W 
consisting of: 
Probe 
with integrated dust sensors, 
differential pressure probe and temperature measurement 
?p-transmitter and preamplifier for single signals 
Connection cable: 5 m (standard) 
dimensions probe head: appr. 250 x 350 x 300 mm 
immersion depth:  appr. 500 mm (others on request)
Control unit 
with integrated LCD-display for visualisation of: 
dust concentration, gas velocity and temperature 
input-display, automatic measuring range selection 
voltage:  230 VAC, 50 Hz ; 24 VDC 
output:  analogue signals 4...20 mA for: 
 dust concentration normalised, 
 dust concentration measured, 
calibration signal 
6 potential free contacts for signalling of: 
measuring modes, 
 limit value violations and 
measuring ranges 
dimensions:  240 x 310 x 270 mm 
10.170,00 
Dr. F?disch 
Umweltmesstechnik AG
Zwenkauer Stra?e 159, D-04420 Markranst?dt
T. +49-34205-755-0, F. +49-34205-755-40
www.foedisch.de
6
Dust Measuring Device PFM 97ED*) 
*) validated by authorities for dust concentration measurement 
according to TA Luft, 13
th
, 17
th
, 27
thBImSchV  
especially for applications in wet and/or sticky gases 
consisting of: 
Probe unit 
sampling probe, immersion depth: 500 mm 
(standard length, others on request) 
sampling tube heated with flange DN 80 PN 6 
injector pump for suck off measuring gas 
monitoring of gas flow 
triboelectric sensor with electronic unit 
plug connections to control unit 
weather protection case IP 65 
Frame with evaluation unit 
Dimensions:   600 x 1700 x 500 mm 
Degree of protection:  IP 65 
Power supply:   3 ~ 400 V / 50 Hz 
Fuse:   16 A 
equipped and ready for installation wired with: 
Evaluation unit 
with integrated LCD – Display for display of 
dust concentration, gas flow and heating 
temperature, 
analogue outputs 4-20 mA for dust concentration 
and calibration signal 
floating contacts for 
maintenance, 
failure, 
limit values and 
maintenance request 
Voltage and signal distribution
to the control of the beforehand specified devices 
2 side channel blowers 
for operating the injector pump and supplying dilution 
air 
27.450,00 
Dr. F?disch 
Umweltmesstechnik AG
Zwenkauer Stra?e 159, D-04420 Markranst?dt
T. +49-34205-755-0, F. +49-34205-755-40
www.foedisch.de
7
Dust Concentration Measuring Device PFM 06ED 
*) validated by authorities for dust concentration measurement 
according to TA Luft, 13
th
, 17
th
, 27
thBImSchV  
especially for applications in wet and/or sticky gases 
Consisting of: 
Probe unit 
sampling probe at heated tube, total length: 1.000 mm 
immersion depth: 800 mm 
injector for conveying of measuring gas 
flow monitoring 
scattered-light sensor 
plug connections to the control unit being easy to maintain 
weather protection case IP 65 
dilution air with heating 
Frame with evaluation unit 
Dimensions:   600 x 1700 x 500 mm 
(W x H x D) 
 Degree of protection:  IP 65   Connection voltage:  3 ~ 400 V / 50 Hz  with N and PE 
Fuse:  16 A 
equipped and wired being ready for installation with: 
Evaluation unit 
 with integrated LCD – Display for display of 
 dust concentration, flows and heating temperature, 
 analogue outputs 4-20 mA for dust concentration 
 and calibration signal aswell as 2 freely-assignable 
analogue 
 outputs (e.g. temperature, flow) 
 potential-free contacts for maintenance, failure, 
 limit values and maintenance request 
Voltage and signal distribution
 for the control of the beforehand specified devices 
2 side channel blowers 
  for the operation of the injector and    the supply of dilution air 
34.600,00