1-GEN16T-2數據采集系統

GEN16t - 瞬態記錄儀和數據采集系統

GEN16t 是一款堅固耐用的瞬態記錄儀，是久經驗證的 GEN 系列數據采集系統的成員之一。 GEN16t 帶有16個插槽，可支持任意組合的采集卡。GEN16t 通過 Perception 軟件配置和控制。這種組合能夠讓您超快速記錄，分析數據并生成報告。

產品描述
GEN16t 配有一個高速 1 Gbit 光纖以太網接口，能夠以 100 MB/s 的速率直接記錄數據到PC?？蛇x的 1 Gbit 光纖以太網允許主機進行隔離控制，電纜長度可高達 10 km，并且能保證*的數據傳輸力。

可選 10 Gbit 光纖以太網接口能夠使流盤速率高達 200 MB/s 或更高。當需要數據可靠或分布式存儲時，GEN16t 主機能夠通過固態硬盤或網絡附加存儲（NAS）設備完成。

通過 IRIG 或 IRIG/GPS 卡，GEN16t 能夠同步時間到其他系統。通過可選的 主/從 卡，多臺 GEN DAQ 系統可以實現時間同步。

GEN DAQ 數據采集卡

Bridge Card 200 kS/s (GN410)
The GEN DAQ Bridge ISO 200kS/s Input Card supports strain gage signal conditioner with voltage and current excitation, supporting quarter, half and full bridges. In sensor mode string pots, PT100 and other voltage or current excited sensors can be used.

View full product details

Bridge Card 1 MS/s (GN411)
The GEN DAQ Bridge ISO 1MS/s Input Card supports strain gage signal conditioner with voltage and current excitation, supporting quarter, half and full bridges. In sensor mode string pots, PT100 and other voltage or current excited sensors can be used.

View full product details

High-Speed Card 100 MS/s (GN412)
For ultra fast signals, the 25 MS/s and 100 MS/s high speed digitizer boards are equipped with four channels sampling at incredible high speed.

View full product details

High-Speed Card 25 MS/s (GN413)
For ultra fast signals, the 25 MS/s and 100 MS/s high speed digitizer boards are equipped with four channels sampling at incredible high speed.

View full product details

Universal Card 200 kS/s (GN440)
The GEN DAQ Universal ISO 200kS/s Input Card supports card with ultra-fast amplifier serves a variety of needs; from differential and/or isolated measurements to IEPE-based vibration or shunt-based current measurements.

View full product details

Universal Card 1 MS/s (GN441)
The GEN DAQ Universal ISO 1MS/s Input Card supports card with ultra-fast amplifier serves a variety of needs; from differential and/or isolated measurements to IEPE-based vibration or shunt-based current measurements.

View full product details

High Voltage Card 2 MS/s (GN610)
The isolated balanced differential inputs allowdirect connection to any voltage up to 600 V RMS on both inputs of each channel. The signal conditioner provides voltage inputs from ± 20 mV to ± 1000 V combining low and high voltage input ranges all in one card. The model uses two 4 mm safety banana plugs foreach channel.

View full product details

High Voltage Card 200 kS/s (GN611)
The isolated balanced differential inputs allow direct connection to any voltage up to 600 V RMS on both inputs of each channel. The signal conditioner provides voltage inputsfrom ± 20 mV to ± 1000 V combining low andhigh voltage input ranges all in one card.

View full product details

Basic Card 200 kS/s (GN810)
The basic signal conditioner provides eight channels of single ended voltage inputs from ± 1 V to ± 50 V full scale with full offset andauto-zero capability.

View full product details

Basic Card 1 MS/s (GN811)
The GEN DAQ Basic 1 MS/s Input Card is ageneral purpose signal conditioner for use with voltage inputs, externally conditioned signalsor probes and current clamps.

View full product details

Basic Iso Card 1 MS/s (GN812)
The GEN DAQ Basic ISO 1 MS/s Input Card isa general purpose signal conditioner for use with voltage inputs, externally conditioned signals or isolated probes and current clamps.

View full product details

Basic XT Iso 1 MS/s Input Card (GN813)
The GEN DAQ Basic XT ISO 1 MS/s Input Card is a general purpose signal conditioner for use with voltage inputs, externally conditioned signals or isolated probes and current clamps.

View full product details

Basic XT Iso Card 200 kS/s (GN814)
The basic signal conditioner provides eight channels of single ended voltage inputs from ± 1 V to ± 50 V full scale with full offset and auto-zero capability.

View full product details

16/32 Channel Accel Card (GN1610 and GN3210)
In Accelerometer mode, they offer excellent price/performance inputs for an array of IEPE based sensors (accelerometers, microphones, etc.). 
In Charge mode they can be used directly with charge type sensors e.g. piezoelectric accelerometers or pressure transducers. 
Furthermore they can be used as entry level electrical input amplifiers to measure electrical signals, for example (voltage drops over shunts)

View full product details

16/32 Channel Basic Card (GN1611 and GN3211)
As a differential amplifier, these cards can be used in electrically noisy environments. They can be used as entry level electrical input amplifiers to measure electrical signals (voltage drops over shunts). As a single ended amplifier these cards can serve as a cost effective coupler input for preconditioned signals to be recorded.

View full product details

Digital/ Fiber Optical Input Card (GN4070)
It enables to record up to 32 binary input channels (marker channels) as well as 8 digital event signals that are optically isolated with up to 1 MS/s per channel. Although general purpose, this board is specifically suited for the high power/high voltage market.

View full product details

Digital Input Card (GN6470)
It enables to record up to 64 binary input channels (marker channels) with up to 1 MS/s per channel. In addition 9 binary input channels can be assigned under software control to provide 3 channels of counter/timer functionality.

View full product details

關鍵特性
機架式19“主機
帶有16個插槽
可以接受采集卡任意組合
支持高達 512 模擬通道
100 MB/s 持續流盤速率
可選 1 GBit 光纖以太網
可選 10 Gbit 光纖以太網，200 MB/s 持續流盤速率
IRIG/GPS 時間同步
主/從 時間同步