ZJD-B數字式介電常數及介質損耗測試儀

 儀器介紹

    ZJD-B全數字顯示介電常數及介質損耗測試儀是根據GB/T 1409《測量電氣絕緣材料在工頻、音頻、高頻（包括米波波長在內）下電容率和介質損耗因數的試驗方法》（等效采用IEC 60250）設計和制造的，并符合JB 7770等試驗方法。它適用于在高頻（1MHz）下絕緣材料的測試。

 ZJD-B數字式介電常數及介質損耗測試儀讀書清晰,無須換算,操作簡便,特別適合電子元器件的質量分析,品質控制,科研生產,也可用于高校的電子信息,電子通信,材料科學等專業作科研實驗儀器.

技術參數

ZJD-B digital dielectric constant and dielectric loss tester

儀器介紹

Introduction of apparatus

ZJD-B全數字顯示介電常數及介質損耗測試儀是根據GB/T 1409《測量電氣絕緣材料在工頻、音頻、高頻（包括米波波長在內）下電容率和介質損耗因數的試驗方法》（等效采用IEC 60250）設計和制造的，并符合JB 7770等試驗方法。它適用于在高頻（1MHz）下絕緣材料的測試。

ZJD-B digital display of dielectric constant and dielectric loss tester is according to GB/T 1409 "measurement of electrical insulating materials at power, audio, high-frequency (including wavelength, VHF) test method for permittivity and dielectric loss factor" (equivalent to adopt the IEC 60250) design and manufacturing, and in accordance with the JB 7770 test method. It is suitable for high frequency (1MHz) of insulating materials under test.

ZJD-B數字式介電常數及介質損耗測試儀讀書清晰,無須換算,操作簡便,特別適合電子元器件的質量分析,品質控制,科研生產,也可用于高校的電子信息,電子通信,材料科學等專業作科研實驗儀器.

ZJD-B digital dielectric constant and dielectric loss tester read clearly, without conversion, easy operation, especially suitable for electronic components quality analysis, quality control, research and production, can also be used for electronic information, University of electronic communication, materials science and other professional scientific experiment instrument.

技術參數

Technical parameters

信號源頻率范圍 DDS數字合成 10KHz-60MHz Q測量范圍 1-1000自動/手動量程

The signal source frequency range DDS digital synthesis of 10KHz-60MHz Q measurement range of 1-1000 automatic / manual range

信號源頻率覆蓋比 6000:1 Q分辨率 4位有效數,分辨率0.1

The signal source frequency coverage than the 6000:1 Q resolution 4 bit number, resolution 0.1

信號源頻率精度 3X10 -5 ±1個字,6位有效數 Q測量工作誤差 <5%

The signal source frequency accuracy of 3X10 -5 ± 1 words, 6 effective number Q measurement error of <5%

電感測量范圍 15nH-8.4H,4位有效數,分辨率0.1nH 調諧電容 主電容30-500PF

Inductance measurement range of 15nH-8.4H, 4 valid data, the resolution of 0.1nH tuning capacitor, capacitor 30-500PF

電感測量誤差 <5% 調諧電容誤差和分辨率 ±1.5P或<1%

Inductance measurement error of <5% tuning capacitor error and resolution ± 1.5P or <1%

標準測量頻點 全波段任意頻率下均可測試 Q合格預置范圍 5-1000聲光提示

Standard measuring frequency band of arbitrary frequency can test ualified preset range 5-1000 acousto-optic prompt

諧振點搜索 自動掃描 Q量程切換 自動/手動

Resonant point search automatically scanning Q range switching automatic / manual

諧振指針 LCD顯示 LCD顯示參數 F,L,C,Q,波段等

Resonant pointer LCD display LCD display parameters F, L, C, Q, band etc