您好, 歡迎來到化工儀器網
12
| 3C額定電壓范圍 | 36V及以下 |
|---|
產品簡介
詳細介紹
安捷倫電子流量計是一種基于熱傳導原理的流量計，主要適用于氣體流量的測量。其原理是將樣品氣體從流量控制器中通過，進入熱敏元件及參考元件中，熱敏元件和參考元件中都有一根加熱絲，當氣體流經這根加熱絲時，會帶走一定的能量，使加熱絲的溫度發生變化，然后熱敏電阻將加熱絲的溫度變化轉換成電壓信號輸出。經過運算和處理后，就可以得到樣品氣體的流量值。同時，參考元件的加熱絲保持恒定的溫度，作為參照，保證了測量的準確性和精度。
型號： G6691A
| G3285-80015 | Inert sample intro kit Platinum 2.5mm id |
| G3285-80016 | Inert sample intro kit Sapphire 1.5mm O2 |
| G3285-80017 | Inert sample intro kit Platinum 1.5mm O2 |
| G3285-80020 | End Cap for Inert Kit,PFA |
| G3285-80021 | Spray Chamber for Inert Kit,PFA |
| G3285-80022 | PFA drain tube for inert kit 7500 ICP-MS |
| G3285-80023 | Connector tube for inert kit, no port |
| G3285-80024 | Long connector tube for ICP-MS inert kit |
| G3285-80034 | Sapphire injector, inert torch, 2.5mm id |
| G3285-80035 | Platinum injector, inert torch, 2.5mm id |
| G3285-80036 | Sapphire injector 1.5 mm id with O2 port |
| G3285-80037 | Platinum injector, inert torch, 1.5mm id |
| G3285-80050 | Torch,Quartz,for PFA inert kit |
| G3285-80085 | O-rings for injector, inert torch, 10/pk |
| G3286-80100 | Sample probe,0.8mm ID for ASX-500 Series |
| G3286-80101 | Sample probe,0.3mm ID for ASX-500 Series |
| G3286-80102 | Sample probe,0.5mm ID for ASX-500 Series |
| G3286-80103 | ASX-500 sample rack,21 tubes x 50mL vial |
| G3286-80104 | ASX-500 sample Rack,24 tubes x 30mL vial |
| G3286-80105 | ASX-500 sample rack,40 tubes x 20mL vial |
| G3286-80106 | ASX-500 sample rack,60 tubes x 14mL vial |
| G3286-80107 | ASX-500 sample rack, 90 tubes x 8mL vial |
| G3286-80110 | Sample probe, carbon fibre 0.8mm id ASX |
| G3286-80111 | Sample probe, carbon fibre 0.3mm id ASX |
| G3286-80112 | Sample probe, carbon fibre 0.5mm id ASX |
| G3286-80117 | Rinse/drain tubing hook up kit,ASX-500 |
| G3286-80118 | Drain tubing/connector kit, ASX-500, 1/p |
| G3286-80224 | Rinse Station for ASX-500 Series, 1/pk |
| G3286-80230 | Z-Axis Drive Assy for Agilent ASX-500 |
| G3286-80330 | Z-Axis drive assy ASX520, EK anti-kink |
| G3388B | Handheld Gas Leak Detector |
| G3440-60003 | New-ReNEWable Gas Purifier Crtg |
| G3440-60004 | ReNEWable Gas Purifier - New StartUp Kit |
| G3440-69003 | EXCH-ReNEWable Gas Recycled Crtg |
| G3440-80007 | ReNEWable Gas Purifier - Base Only |
| G3440-85012 | Solvents-Plus Checkout Mix 3 x 2mL |
| G3440-85013 | C6 through C12 Hydrocarbon Mix 3 x 2mL |
| G3440-85017 | Natural Gas Analyzer Checkout Mix 17L |
| G3440-85018 | Standard glycerides in THF 1 x 2mL |
| G3440-85026 | Methyl nonadeconate in toluene 5 x 10mL |
| G3440-85027 | FAME retention time std in toluene 5x2mL |
| G3440-85028 | Glycerol calibration kit 5 x 1mL |
| G3440-85029 | Methylheptadecanoatd33 In Dodecane 3x2mL |
| G3440-90000 | ReNEWable Gas Purifier Cartridge Manual |
| G3440-90001 | ReNEWable Gas Purifier - System Manual |
| G3510-60820 | Multi Mode Inlet Cleaning Kit |
| G3520-20210 | XLSI Transfer Line Nut for CFT Fitting |
| G4200-80101 | Plunger,replacement CTC 1000ul |
| G4200-80102 | Plunger,replacement CTC 250ul,10 pack |
| G4200-80103 | Plunger,replacement CTC 10ul,10 pk |
| G4200-80104 | Plunger,replacement CTC 25ul,10 pk |
| G4200-80105 | Plunger,replacement CTC 100ul,10 pk |
| G4200-80106 | Plunger,replacement CTC 500ul |
| G4200-80107 | Plunger,replacement CTC 2500ul |
| G4200-80108 | Plunger,replacement CTC 5000ul |
| G4200-80111 | Plunger,replacement CTC-X 100ul,3 pk |
| G4200-80112 | Plunger,replacement CTC-X 25,3pk |
| G4200-80113 | Syringe,CTC 10ul, GT,HTC-Pal |
| G4200-80114 | Syringe,CTC 25ul, GT,HTC-Pal |
| G4200-80115 | Syringe,CTC 100ul, GT,HTC-Pal |
| G4200-80116 | Syringe,CTC 100ul,S GT,HTC-Pal |
| G4200-80117 | Syringe,X-ty CTC 25ul,GT,HTC-Pal |
| G4200-80118 | Syringe,X-ty CTC 100ul,22,GT,HTC-Pal |
| G4200-80119 | Syringe,X-ty CTC 100ul,22S,GT,HTC-Pal |
| G4203-68708 | HPLC System Tool Kit |
| G4220-20041 | Bit Torx 10x25 mm |
| G4226-60415 | Loop flex assembly 40 ul |
| G4277-80120 | Syringe,100ul,RN,PTFE DLW 1290 HTC/HTS |
| G4277-80122 | Plungers,replacement 100ul,DLW HTC/HTS |
| G4277-80125 | Needle kit,pk 3 22g/51mm/PT 3 with nut |
| G4296-68715 | 1220 Infinity LC Tool Kit |
| G4383-40000 | Short Circuit Plug for pH meter |
| G4383A | 3200P benchtop pH meter |
| G4384A | 3200C Conductivity meter |
| G4385A | 3200D dissolved oxygen meter |
| G4386A | 3200I ion meter |
| G4387A | 3200M multi meter |
| G4388-27000 | Stir bar for 3200SA Stirrer |
| G4388A | 3200A stirrer |
| G4389A | 3200EA electrode holder |
| G4391A | 3200P pH meter basic package |
| G4392A | 3200P pH meter pkg w/triode electrode |
| G4393A | 3200C conductivity meter basic pkg |
| G4394A | 3200C conductivity for pure water pkg |
| G4395A | 3200D dissolved oxgn meter basic pkg |
| G4396A | 3200I Ion meter basic package |
| G4397A | 3200I Fluoride ion meter basic package |
| G4398A | 3200M multiparameter analyzer basic pkg |
| G4401A | 3200P pH meter pkg no stand |
| G4402A | 3200P pH meter pkg triode elcrd no stand |
| G4513-60560 | Syringe,250uL FN,PTFE,23/42/HP |
| G4513-60561 | Syringe,500uL FN,PTFE,23/42/HP |
| G4513-80200 | Syringe, 10 ul FN 23-26s/42/HP 6pk |
| G4513-80201 | Syringe, 5 ul FN 23-26s/42/HP 6pk |
| G4513-80202 | Syringe, 10 ul FN 23/42/HP 6/pk |
| G4513-80203 | Syringe, 10ul PTFE tip, FN 23-26/42/HP |
| G4513-80204 | Syringe, 10ul FN 23-26s/42/HP |
| G4513-80205 | Syringe, 5 ul, FN, 23/42/HP 6/pk |
| G4513-80206 | Syringe, 5 ul, FN 23-26s/42/HP |
| G4513-80207 | Syringe, 5 ul on-column RN, barrel only |
| G4513-80208 | Syringe, 10ul PTFE, FN 23-26/42/HP, 6/pk |
| G4513-80209 | Syringe 10ul straight, FN 23/42/HP |
| G4513-80210 | Syringe,10 ul, PTFE, FN, 23/42/HP 6/pk |
| G4513-80211 | Syringe, 10 ul, FN, 26s/42/HP 6/pk |
| G4513-80212 | Syringe, 5 ul, FN, 26s/42/HP 6/pk |
| G4513-80213 | Syringe, 5ul straight, FN 23/42/HP |
| G4513-80214 | Needle 0.32mm on-column,5ul syringe 3/pk |
| G4513-80215 | Syringe, 1 ul, 23g, 42mm cone tip |
| G4513-80216 | Syringe, 10ul straight, FN 26s/42/HP |
| G4513-80217 | Needle 0.25mm on-column,5ul syringe 3/pk |
| G4513-80218 | Syringe, 10 ul RN 23-26s/42/HP |
| G4513-80219 | Syringe,10 ul PTFE tip RN 23/42/HP |
| G4513-80220 | Syringe,10ul FN PTFE tip 23/42/HP |
| G4513-80221 | Syringe, 50ul, PTFE tip FN 23/42/HP |
| G4513-80222 | Syringe, 100ul PTFE tip, FN 23-26s/42/HP |
| G4513-80223 | Syringe, 50ul, PTFE tip, FN 23-26/42/HP |
| G4513-80224 | Syringe, 5ul RN, 23-26s/42/HP |
| G4513-80225 | Needles Replacement 23-26s/42/HP 3/pk |
| G4513-80226 | Syringe, 5ul straight, FN 26s/42/HP |
| G4513-80227 | Plunger 10 ul, fixed needle, PTFE |
| G4513-80228 | Syringe 25ul, PTFE tip FN 23/42/HP |
| G4513-80229 | Syringe, 0.5 ul, 23g, 42mm cone tip |
| G4513-80230 | Syringe, 100 ul, FN 23s/42/HP |
| G4513-80233 | Syringe, 10 ul,PTFE tip,RN, 23-26s/42/HP |
| G4513-80234 | Syringe, 5 ul RN 23/42/HP |
| G4513-80235 | Syringe,10 ul PTFE tip RN 23/42/HP |
| G4513-80236 | Needles replacement 23/42/HP 3/pk |
| G4513-80239 | Needle/plunger replacement kit 1ul auto |
| G4513-80240 | Needle/plunger replacemt kit 0.5 ul auto |
| G4513-80241 | Syringe 25ul PTFE tip FN 23-26/42/HP |
| G4513-80242 | Syringe, 25 ul, FN 23-26/42/HP |
| G4513-80243 | Syringe, 100ul FN 23-26/42/HP |
| G4513-80244 | Syringe, 50ul FN 23-26/42/HP |
| G4911-67000 | ri pump tube Tygon 2-stop org/blu 12/p |
| G4912-68000 | PFA Inert kit, Sapphire 2.5mm with Torch |
| G4912-68001 | PFA Inert kit, Platinum 2.5mm with Torch |
| G4912-68002 | PFA Inert kit, Sapphire 1.5mm with Torch |
| G4912-68003 | PFA Inert kit, Platinum 1.5mm with Torch |
| G4912-80010 | Sapphire injector, inert torch, 1.5mm id |
| G4912-80011 | Platinum injector, inert torch, 1.5mm id |
| G4912-80012 | Torch for PFA inert kit for ICP-MS, 1/pk |
| G4912-80013 | Demountable torch, ICP-MS inert kit 1/pk |
| G4912-80014 | PFA drain tube for inert kit, ICP-MS |
| G4912-80016 | Connector tube with gas port, inert kit |
| G5611-60500 | Ti capillary 0.17 mm ID, 400 mm long |
| G5611-60501 | Ti capillary 0.17 mm ID,700 mm long |
| G5611-60502 | Ti capillary 0.17 mm ID, 900 mm long |
| G5611-60503 | Ti capillary 0.17 mm ID, 160 mm long |
| G5611-67300 | Ti capillary 0.60 mm ID, 248 mm long |
| G5611-67301 | Ti capillary 0.60 mm ID, 234 mm long |
| G5611-68711 | Capillary Starter Kit 0.17mm Bio |
| G5611-68755 | Accessory Kit BIO |
| G5616-81000 | Heat exch.PK/ST 0.17x500 RLO/RLO Bio |
| G5664-60901 | Bio inert 3-2 way valve assembly |
| G5667-81000 | Capillary PK/ST 0.17x105mm RLO/RLO BIO |
| G5667-81001 | Capillary PK/ST 0.17x150mm RLO/RLO BIO |
| G5667-81002 | Capillary PK/ST 0.17x200mm RLO/RLO BIO |
| G5667-81003 | Capillary PK/ST 0.17x300mm RLO/RLO BIO |
| G5667-81004 | Capillary PK/ST 0.17x400mm RLO/RLO BIO |
| G5667-81005 | Capillary PK/ST 0.17x500mm RLO/RLO BIO |
| G5667-81006 | Loop PK/ST 100ul RLO/RLO Bio |
| G5667-81007 | Capillary PK/ST 0.17x700mm RLO/RLO BIO |
| G5667-81008 | Seat PK/ST 0.17x105 RLO/RLO Bio |
| G6500-60019 | Headspace Syringe Holder Kit, 5ml |
| G6500-80100 | Sample tray,CTC,200 vials,0.7 or 1ml |
| G6500-80101 | Sample tray,CTC,98 2ml / 78 1ml vials |
| G6500-80102 | Syringe,CTC 250ul, GT,HTC-Pal |
| G6500-80103 | Syringe,CTC 500ul, GT,HTC-Pal |
| G6500-80104 | Syringe,CTC 1000ul,GT,HTC-Pal |
| G6500-80105 | Syringe,CTC 2500ul,GT,HTC-Pal |
| G6500-80106 | Syringe,CTC 5000ul, GT,HTC-Pal |
| G6500-80107 | Syringe, CTC Headspace, 1.0 ml, 23 g |
| G6500-80109 | Syringe, CTC Headspace, 2. 5 ml, 23 g |
| G6500-80111 | Syringe, CTC Headspace, 5.0 ml, 23 g |
| G6500-80113 | Syringe, CTC 1.2 ul, 2 Combi/GC-Pal |
| G6500-80114 | Syringe, CTC 5 ul, 2 Combi/GC-Pal |
| G6500-80115 | Syringe, CTC 10 ul, pt 2 Combi/GC-Pal |
| G6500-80116 | Syringe, CTC 10 ul, Combi/GC-Pal |
| G6500-80117 | Syringe, CTC 25 ul, Combi/GC-Pal |
| G6500-80118 | Syringe, CTC 100 ul, Combi/GC-Pal |
| G6500-80119 | Syringe, CTC 250 ul, Combi/GC-Pal |
| G6500-80120 | Syringe,CTC 500 ul,Combi/GC-Pal |
| G6500-80121 | Sample tray,CTC,32 10 or 20ml vials |
| G6500-80122 | Sample tray,CTC,for PAL stack |
| G6500-88027 | Caps and Seals for Wash Sta Vials (10) |
| G6874-80000 | Scular reflect. std, 7 deg, NIST cert. |
| G8000-64142 | Nebulizer gas connector for 4100 MP-AES |
| G8000-70001 | Replacement onboard Argon bottle |
| G8000-70006 | MP s/chamber, single pass glass cyclonic |
| G8000-70007 | MP s/chamber, double pass glass cyclonic |
| G8000-70008 | MP s/chamber, inert single pass cyclonic |
| G8400-60327 | Clamps,torch ball joint connector,2/pk |
| G8400-60700 | Argon humidifier, two gas lines, 7900 |
| G8400-67150 | Spray Chamber double pass, 7900 ICP-MS |
| G8400-67200 | Ni skimmer cone for 7900 ICP-MS, 1/pk |
| G8400-67201 | Pt skimmer cone, Cu base, 7900 ICP-MS |
| G8400-67202 | Pt skimmer cone, Ni base, 7900 ICP-MS |
| G8431-80000 | Deuterium UV lamp for AA instruments,1/p |
| G8480-80001 | Carbon fibre probe update Kit for SPS3 |
| G8480-80002 | SPS 3 Probe 1.2mm id inert, carbon fibre |
| G9203-80004 | Tygon Tubing for ristaltic pump 2/Pk |
| G9820-80000 | Deuterium UV lamp,Cary 100/300 UV, 1/pk |
| GD5141324 | SS Tubing 1/16in X 0.020 In X 25 Ft |
| GD5141382 | SS Tubing 1/16in X 0.030in X 10 Ft. |
| GD5141383 | Tubing, ss, 1/16 in X 0.020 in X 10 ft |
| GD5141384 | SS Tubing 1/16in X 0.010in X 10 Ft. |
| GMT-2GC-HP | Trap, Glass H20, 13 X /4A, 1/8inch, 70cc |
| GMT-2-HP | Trap, Glass H20, 13 X /4A, 1/8in 100cc |
| GMT-4-HP | Trap, Glass H20, 13 X /4A, 1/4" 100cc |
| HCRMS | Refill, Hydrocarbon-H2O Trap ,1pt |
| HDW-2170 | Replacement Genie Membrane Filters 5PK |
| HFM-420-B | Bubblemtr Glassware Repair Kit, HFM-420 |
| HFM-570-B | Bubblemtr Glassware Repair Kit, HFM-570 |
| HFM-570FC-B | Bubblemtr Glass Repair Kit, HFM-570-FC |
| HFM-650-B | Bubblemtr Glassware Repair Kit, HFM-650 |
| HFM-650FC-B | Bubblemtr Glass Repair Kit, HFM-650-FC |
| HFM-650-FT | Replacement Flow Trap Tube Kit, HFM-650 |
| HFM-730-FT | Replacement Flow Trap Tube Kit, HFM-730 |
| HFM-BULB | Bulb, Small,Humonics Flowmeter (12) |
| HMT200-2 | Trap, Hydrocarbon-H2O, 1/8in, 200cc |
| HMT200-4 | Trap, Hydrocarbon-H2O, 1/4", 200cc |
| HT200-2 | Trap, Hydrocarbon, 1/8", 200cc |
| HT200-4 | Trap, Hydrocarbon, 1/4", 200cc |
| HT3-2 | Trap, Hydrocarbon, CapGr, 1/8", 100cc |
| HT3-4 | Trap, Hydrocarbon, CapGr, 1/4", 100cc |
| IOT-2-HP | Trap, O2 Indicating, 1/8inch |
| IOT-2-SS-HP | 1/8in Indicating Trap W/SS Swagelok |
| IOT-4-HP | Trap, O2 Indicating, 1/4" |
| IOT-4-SS-HP | 1/4in Indicating O2/H20 w/SS Ftg |
| IT90852010 | colsaver,pre-col fltr,EK,2 um,10/PK |
| L9910028200 | Godets 2 mL, (PP) crystal, 1/pk |
| LGMT-4-HP | Trap, Glass H20, 13X/4A, 1/4" 250cc |
| LIOT-4 | Trap, O2, 1/4", Lg Capacity |
| MC-1 | Clip, Mtg, 120-200cc |
| MLA160050M | CAP, 16mm STEEL SCREW,w/PTFE./SIL. SEPTU |
| MLAL1000023 | Seals,wash/waste vials,10/20/100mL,20/p |
| MM0300A | press regul,CombiPal,0-30 psi,1/pk |
| MSR-1 | Economy Moisture Trap Refill, 1pt |
| MT120-2 | Economy Moisture Trap, 1/8in, 120cc |
| MT120-4 | Economy Moisture Trap, 1/4in, 120cc |
| MT200-2 | Economy Moisture Trap, 1/8in, 200cc |
| MT200-4 | Economy Moisture Trap, 1/4in, 200cc |
| MT-2-SS | Trap, H2O, HighPress, 1/8" |
| MT400-2 | Economy Moisture Trap, 1/8in, 400cc |
| MT400-4 | Economy Moisture Trap, 1/4in, 400cc |
| MT-4-SS | Trap, H2O, HighPress, 1/4" |
| OT1-2 | Oxygen Trap, 1/8" |
| OT1-4 | Oxygen Trap, 1/4" |
| OT-2-SS | Trap, O2, Hi Pressure SS, 1/8" |
| OT3-2 | Trap, O2/H2O, 1/8" |
| OT3-2-SS | 1/8in O2/H2O Trap w/SS Fitting |
| OT3-4 | Trap, O2/H2O, 1/4" |
| OT3-4-SS | 1/4 O2/H2O Trap w/SS Fitting |
| OT-4-SS | Trap, O2, Hi Pressure SS, 1/4" |
| PCG363220200 | TUBE FITTING 18 TEE |
| PCG369220200 | TUBE FITTING - 18in. NUTS |
| PCG369720100 | PLUG NUT |
| PCG431400025 | Lamp,UV,LH-25,for O. 2501 detector,1/pk |
| PL0800-0003 | Valve Rotor Seal |
| PL0810-4001 | SAMPLE PREPARATION VIALS (SERIAL NO |
| PL0870-1510 | Lamp,Deuterium,1/pk |
| PL0870-8120 | Syringe (1 ml) for PL-AS syringe pump |
| PL4-30373 | Lamp,tungsten,1/pk |
| R000010164 | Tee 3-Way 1/16 .043 Bore |
| R000038111 | Filter,Nylon 66, 47 mm, 0.2 um,100/pk |
| R000038112 | Filter,nylon 66,13mm disk 0.45um,100/pk |
| R000038114 | Filter,47mm disk,pore sz 0.45 uM,100/pk |
| R000038140 | Solvent filter apparatus,1/pk |
| R000050107 | Filters, repl, SS, 2um, 2/pk |
| R000050108 | Solvent filter,SS,2um,1/16 in.,1/pk |
| R000088515 | Lamp,deuterium, pre-align,repl,1/pk |
| R000088516 | Lamp,Prostar 340/345,tungsten,1/pk |
| R000383005 | Tubing,SS,1/16 in.ODx0.046 mm,5 ft,1/pk |
| R000FTF301 | HI-PRES NUT/FERRULE EK |
| R000IZR21L | Port adaptor,SS,for tubing 1/16in,1/pk |
| R007000054 | MIXER FILTER, 2u, 10MM |
| R007000105 | Seal retainer, front frit, 10 mm, 1/pk |
| R007101645 | UHD HSTLOY SEAL F/ 25ML SS/WTI |
| R007105549 | FILTER, 20-60 MICRONS (POREX) |
| R020008001 | TUBE END FITTING 1/8 NA |
| R020008002 | SS Washer 1/8 |
| R020017001 | TEFZEL PLUG 1/4 X 28, 0.64 IN. LONG |
| R020031100 | Tubing,PTFE,0.8mmx1.5mm/ft,1/pk |
| R020032100 | PTFE TUBING 1.5MM X 3MM R FOOT |
| R0PTF20KIT | Tubing,12 ferrl 12 nuts, 1/16in.OD, 1/p |
| R0PTF30KIT | FITTING KIT FLANGELESS 1/8 |
| R38DG115SI | Pwr strip, 6-outlt,surge prot,6 ft, 1/p |
| RDT-1020 | Trap, SplitVent and 3 PK Cart. |
| RDT-1023 | Cartridges,SplitVentTrap(3) |
| RE3725018 | Rotor seal, Rheodyne prep inj vlvs, 1/p |
| RE3725086 | Needle, smpl loadg,SS,Luer, 16 ga, 1/pk |
| RE6000051 | Ferrules,EK,flangelss ftg, 1/16in 5pk |
| RE6000079 | RHEFLEX FERRULES, EK, 1/8 (5 PKG) |
| RE6000083 | Ferrules,ss,access Rheflex 1/8in,5/pk |
| RE6000109 | 10-32 1/16 ss ftgs st, 5/pk |
| RE6000210 | RHEFLEX FERRULES, SS (10 PKG) |
| RE6000282 | RheFlex 1-Piece Fingertight, EK -10/pk |
| RE6000282MC | Fitting, RheFlex, 1-pc, EK, 10/pk |
| RE6000282RD | RheFlex One-Piece Fingertight, EK (10 |
| RE6000282YL | Rheflex One-Piece Fingertight, ek (10 |
| RE7000 | Switching valve,std,Rheyne 7000,SS,1/pk |
| RE7010011 | Fitting,Rheodyne,SS,long,bulk,100/pk |
| RE7010039 | Rotor seal repl,1/pk |
| RE7010071 | Rotor seal,Rheodyne,Tefzel, 1/pk |
| RE7125079 | Rotor seals,repl,Rheodyne,Tefzel,1/pk |
| RE7125999 | Valve, frnt load, RheBuild kit,1/pk |
| RE7335010 | Filter disk, Rheodyne,0.5um, 3mmOD, 5/p |
| RE7520013 | 1ul Rotor Seal For Model 7520 |
| RE7725999 | Valves,front loading,Rheodyne,1/pk |
| RE7739999 | REBIULD KIT FOR 7739 INJECTOR |
| RE7900999 | Kit,Rheodyne 7900 rebuild,1/pk |
| RE9750999 | RheBuild kit for 9750TPMV,1/pk |
| RF0005T | Screwdriver green handled star shad |
| RF0017T | Glass square 3 by 3 inch |
| RF0030T | Nut extender large |
| RF0031T | Nut extender medium |
| RF0032T | Nut extender small |
| RF0050T | Sipr guide needle, blunt,1.5 inch 5/pk |
| RF0050T-S | Sipr guide needle, sharp,1.5 inch 5/pk |
| RF0052T | Sipr guide needle, blunt,0.5 inch 5/pk |
| RF0052T-S | Sipr guide needle, sharp,0.5 inch 5/pk |
| RF0074T | Ferrule, beige EK, 1/32 inch 3/pk |
| RF0076T | Reducer 1/16 to 1/32 |
| RF0077T | Reducer 1/8 to 1/16 |
| RF0089T | Filter for solvent |
| RF0094T | Ferrule, red, outer diameter 1/32in 10pk |
| RF0097T | Nut, green,1/4-28,outer diameter 1/8 2pk |
| RF0098T | Nut beige, headless 1/4-28, 1/8 V1P4 |
| RF0100T | Nut,beige, flat 10-32,1/32, MS inlet 2pk |
| RF0101T | Nut, black, flangeless 10-32, 1/16 |
| RF0102T | Tubing, Tygon for ristaltic pump |
| RF0103T | Tubing, Halar white, 1/8in, V1P4, 33 in |
| RF0104T-110 | Tubing, clear, OD 1/8 in, 110 in |
| RF0107T-100 | Tubing, blue, OD 1/16 in, 100 in |
| RF0109T-5 | Tubing, red, OD 1/16 in, 5 in |
| RF0110T-3 | Tubing, bg, 1/32, V1P2-V1P5, 3.4in 3/pk |
| RF0110T-60 | Tubing, beige, OD 1/32 in, 60 in |
| RF0110T-7 | Tubing, beige, 1/32, sipr V1P3,7in 3pk |
| RF0111T-2 | Tubing, grey, 1/32, V3P3-V3P4, 2.5in 2pk |
| RF0111T-20 | Tubing, gray, OD 1/32, V4P2-V3P6, 20 in |
| RF0111T-8 | Tubing, gray OD 1/32, V3P1-V1P6, 8 in |
| RF0112T-13 | Tubing, red, OD 1/32 in, V2P4, 13 in |
| RF0112T-16 | Tubing, red, OD 1/32, V2P1, 16 in |
| RF0112T-50 | Tubing ,red OD 1/32 in, V2P2, 70 in |
| RF0112T-6 | Tubing, red, 1/32 in, V1P1-V2P6, 6in 3pk |
| RFT-2500 | Tool, Ferrule, .25-.32mm |
| RFT-5300 | Tool, Ferrule, .53mm |
| RMP-5005 | Microprobe Set, SS (5) |
| RMSH-2 | Big Universal Trap, 1/8" fttgs, Helium |
| RMSH-4 | Big Universal Trap, 1/4" fttgs, Helium |
| RMSHY-2 | Big Universal Trap, 1/8" fttgs, Hydrogen |
| RMSHY-4 | Big Universal Trap, 1/4" fttgs, Hydrogen |
| R-2 | Big Universal Trap, 1/8" fttgs, Nitrogen |
| R-4 | Big Universal Trap, 1/4" fttgs, Nitrogen |
| RSF-1200 | Needle File Set(12) |
| SG003987 | Syringe, SGE,gas-tight, 23ga, 25ul, 1/p |
| SG038732 | Needle,SGE repl,100ul,2/pk |
| SG092005 | Inlet liner,SGE,split/less,2.3mm ID,5/p |
| SG092011 | Liner,split/less,Focuslnr, 4mm ID,25/pk |
| SG092036 | Inlet lnr,SGE,split/less,3.4mm ID,5/pk |
| SG092037 | Inlet lnr,Focuslnr, 3.4mm ID,5/pk |
| SG092245 | Inlet liner,SGE LVI,lg vol, gls,5/pk |
| SN400042 | Dp-wl,1.2ml 96,rnd wl:1.0 ml vol,10/pk |
| SN500817 | Microplate,PP,2.4 mL/2 mL vol,100/pk |
| SN800220 | Closure,Micro Mat,square,96-well,10/pk |
| SWB1021 | 1/16 in Brass Nuts, 10/pk |
| SWSS2003UM | 1/8in SS Union Tees Ultimetal |
| SWSS20074 | 1/8in SS Female Connectors |
| SWSS30062RU | 3/16 -1/8 SS Reducing Union Swagelok |
| SWSS40016 | SS Male Pi Connectors 1/4 -3/8 |
| SWSS40061 | 1/4 - 1/16in.Swagelok SS Reducing Union |
| SWSS40076 | SS Female Pi Connectors 1/4 -3/8 |
| SWSS4031 | 1/4in SS Front Ferrules, 10/Pk |
| SWSS4041 | 1/4inSS Back Ferrules, 10/Pk |
| T120041016 | Ferrule, PTFE, 2-piece, 1/4in.OD, 1/p |
| T141168003 | TEKMAR BLANK TRAP, Velocity XPT |
| T141301016 | Ferrule, PTFE, 1/2in. OD, 1/pk |
| T144983253 | Needle,Tekmar 7000 HS,Silco-steel,1/pk |
| T145092200 | Starter kit,velocity XPT,1/pk |
| UC1533 | ek Tubing .030 X 1/16 X 5ft, Green |
| UC1535 | Tubing,rd,EK, 0.005x1/16in.x5 ft, 1/p |
| UC1550 | TYGON TUBING 2.54mm ID x 3.54mm OD x 3M |
| UC1592 | Adaptor kit,SS,tubg 1/8in.-1/16in.,1/pk |
| UCA100X | Frit,SS,.094in.x.062inx.250in,2um,10/pk |
| UCA102X | Fltr frit,SS,0.062inIDx0.25inOD,10/pk |
| UCA103X | Fltr frit,0.094inx0.062inx0.250in,10/pk |
| UCA200 | Inlet filter kit,solv,SS,10um,5/pk |
| UCA220 | Filter, repl, SS, 10 um, 1/pk |
| UCA302A | Inlet filter,solvent,SS, 1/4-28,1/pk |
| UCA427 | Filter cups, solvent, repl, 10 um, 5/pk |
| UCA428X | Fitting, filter end, EK, 0.5 um, 10/p |
| UCA446 | Filter, 1/8in, 5 ml/mi max, 1 um,1/pk |
| UCA700 | ek Frit .062 X .062 X .250 2um |
| UCB310 | 10cc PLASTIC SYRINGE |
| UCF120 | 1-piece EK fngrt, 1/pk |
| UCF130 | Xtra lng fngrt,EK,10-32 thrd(B) |
| UCF185 | Microtight Sleeves, .015id |
| UCF185X | Microtight Sleeves, .015id (10 Pk) |
| UCF300X | Fitting, EK nut ferrule, 10/pk |
| UCLT100X | Ferrules,for tubing 1/16 in. OD,10/pk |
| UCLT110X | Nut,litetch,EK,1/16in.OD, 10-32, 10/p |
| UCM520 | Micro filter,inline,1-M-120,5/pk |
| UCP100 | PLASTICTIGHT MALE NUT, KEL-F, 1/8in |
| UCP200X | 1/16in FLANGELESS FERRULE TEFZEL 10/pk |
| UCP300NX | 1/8 Flangeless Ferrule, Tefzel, Natural |
| UCP316 | PTFE Plug For 1/4-28 Flat Bottom |
| UCP350X | Ferrule,flnglss ring,EK,1/8in.OD,10/p |
| UCP614 | Adaptors,bio,1/16in-1/8in,EK,ftgs,1/p |
| UCP624 | Adaptor, Luer, Tefzel, 1/4in. - 28, 1/p |
| UCP625 | LUER ADAPTER, MALE LUER TO 1/4-28 MALE, |
| UCP628 | LUER ADAPTER, FEMALE LUER TO 1/4-28 FEM |
| UCP630 | Tefzel Union 1/16 |
| UCP652 | Adptr,EK,1/4-28 fmle to 10-32 MAL,1/p |
| UCP655 | Luer, female to male, 1/4-28, EK, 1/p |
| UCP659 | UCP659FEMALE TO FEMALE LUER, EK |
| UCP676 | 10-32 FEMALE TO MALE LUER, TEFZEL, NATU |
| UCP704 | Union, EK thru hole, 0.020 in., 1/pk |
| UCP70401 | EK union, .020 thru hole, body, 1/pk |
| UCP705 | Union hiprs EK 1/4-28, 0.020inx0.51mm |
| UCP742 | Union,EK 0.010 inID /0.25mm bore,1/pk |
| UCP761 | Cartridge, 40 PSI, blue, 1/pk |
| UCP775 | Micro tee assembly, .025, 1/pk |
| UCS2929 | TUBING,EK,1/16X 125 micron x 10ft |
| UCU127 | SS Tubing .007 X 1/16 X 10cm |
| UCU161 | Tubing,SS,0.007 in.x1/16 in.x25 ft, 1/p |
| UCU321X | Ferrule, Valco compat,SS,1/16in.,10/pk |
| UCU401X | Ferrule 1/16, SS (10 Pk) |
| UMC-1 | Clip, Mtg, Univ. 7/8-1inch OD |
| UMC-2 | Clip, Mtg, Univ.1 1/8-1 3/8" OD |
| UMC-3 | Clip, Mtg, Univ.1 3/8-1 5/8" OD |
| UMC-4 | Clip, Mtg, Univ. 1 5/8-1 7/8" OD |
| UMC-5 | Clip, Mtg, Univ. 2-2 1/2inch OD |
| UMC-5-2 | Clip, Mtg, Univ. 2-2 1/2" OD |
| VL4C6UWT | Valve,manl,6-prt,ftg 1/16in.OD,1/pk |
| VLA4C10UWE | Valve,air act,1/16 inIDx1/4 1/8inOD,1/p |
| VLA4C10WE | 10port 2-pos valve air act 225C/400psi |
| VLA4C6UWE | Valco Valve,6 port 2-positions,1/pk |
| VLA4C6WE | Valve,air actuated, ftg 1/16 in.,1/pk |
| VLA4C8UWE | Air actu,8 port,2-pos vlv,.4 in., 1/pk |
| VLA4C8WE | 8 port 2-pos valve air act 225C/400psi |
| VLA4CI4WE.2/1-VNL | 4 P.2-Pos.Lsv0.2/1 Air Act.4So 225C |
| VLC2C06 | Valve,Stator,6-port,2-position,N60,1/pk |
| VLCSL10K | Valco loop 10 mL with fittings |
| VLCSL250 | 250 ul Sample loop, 1/pk |
| VLCSL5 | Sample loop,Chminrt,SS,5ul,1/16in.,1/p |
| VLCSL500 | Smpl lps for Valco C2 ss vlv 500ul |
| VLCZSL100PK | Sample loop 100 ul, 1/pk |
| VLCZSL50PK | Smpl lps for Valco C2 ak vlv 50ul |
| VLE4CSF6MWE | Valve,6 pos w/elec actuator,1/pk |
| VLEC6W220 | Actuator, 6-port, 2-pos, 1/16in., 1/pk |
| VLEMT4CSD12MWE | Valve,Valco,12 prt,m-pos,0.4 in.,1/pk |
| VLEMT4CSD16MWE | 16p.m-pos el.act.4so 200C |
| VLEMT4CSD6MWE | Valco Valve,6 port multi-poss,1/pk |
| VLEMT4CSF10MWE | 10P.M-POS EL.ACT.4inSO 200deg |
| VLEMT4CSF16MWE | 16P.M-POS EL.ACT.4inSO 200deg |
| VLEN1 | External nut 1/16 SS |
| VLFS145 | Valco fsd SI adapt 1/16 .4 mm ID, 1/pk |
| VLFS55 | Adaptor, fs, 1/32in. ID, 5/pk |
| VLFSR45 | Adaptors, fs, fitg sz 1/32in. OD, 5/pk |
| VLLZN110 | Nut, long, SS, 1/16in. x 0.75in., 10/pk |
| VLSL100CUW | Sample Loop 100ul For Cuw Valve |
| VLSL100CW | Sample Loop 100 ul for CW valve |
| VLSL10CUWUM | UltiMetal Sample Loop 10 ul for CUW vlv |
| VLSL10CW | Loops for W ty vlvs,1/16in,10ul |
| VLSL1KCUWUM | UltiMetal Sample Loop 1 ml for CUW vlv |
| VLSL1KCW | Sample Loop 1 ml for CW valve |
| VLSL20CUWUM | UltiMetal Sample Loop 20 ul for CUW vlv |
| VLSL20CW | Sample loop for W-ty valve,20ul,1/pk |
| VLSL250CUW | Sample loop,UW vlv,1/16in.OD,250uL,1/pk |
| VLSL2CW | Sample loop 2ul for CW valve, 1/pk |
| VLSL2KCUWUM | UltiMetal Sample Loop 2 ml for CUW vlv |
| VLSL2KCW | Sample loop, W-ty valve,SS,2 ml,1/pk |
| VLSL500CUW | Sample loop, for CUW valve, 500 ul, 1/p |
| VLSL500CUWUM | UltiMetal Sample Loop 500ul for CUW vlv |
| VLSL50CUWUM | UltiMetal Sample Loop 50 ul for CUW vlv |
| VLSL5CUWUM | UltiMetal Sample Loop 5 ul for CUW vlv |
| VLSL5CW | Loops for W ty vlvs,1/16 in,5ul |
| VLSL5KCUWUM | UltiMetal Sample Loop 5 ml for CUW vlv |
| VLSSAC10UWE | Rotor for C10UWE,1/pk |
| VLSSAC10WE | Rotor seal,10-port,2-pos,1/pk |
| VLSSAC14UWE | Rotor for C14UWE |
| VLSSAC6UWE | Rotor for C6UWE,1/pk |
| VLSSAC6W | Rotor for C6W,1/pk |
| VLSSAC6WE | Rotor seal,6-port,2-pos valve,1/pk |
| VLSSAC8UWE | Rotor for C8UWE,1/pk |
| VLSSAC8WE | Rotor seal,8-port,2-pos vlv,400psi,1/pk |
| VLVISF1 | Syringe Fillport 1/16 CNctn .75/19mm |
| VLVISF2 | Syrng FLPRT1/16CNCTN 2.0/51mm,22 gge |
| VLZF1S610 | Ferrules,Valco,SS,1/16 in,10/pk |
| VLZF510 | Ferrule SS, 1/32in.OD, 10/pk |
| VLZF5V10 | Ferrule,Valcon,PI,1/32in,10/pk |
| VLZLA1 | Female luer adapter to 1/16 ftgs |
| VLZN1FPK10 | NUT, FINGERTIGHT, VALCO, 1/16 , PK/10 |
| VLZN5 | Nut 1/32in., std, SS, 10/pk |
| VLZN510 | Ss-nut: fitting size, 1/32 in., 10/pk |
| VLZT1C | Tee,Valco 1/16 in.,0.25 mm bore,ss, 1/p |
| VLZT1UM | Tee 1/16in .75mm SS UltiMetal treated |
| VLZT5 | Tee,SS,bore size 25 mm,1/32 in. OD,1/pk |
| VLZT5UM | Tee 1/32in 0.25mm bore SS UM treated |
| VLZU1C | Union, SS,bore 0.25mmID, 1/16in.OD, 1/p |
| VLZU1M | Valco internal union 1/16 in,0.50mm bor |
| 19251-60540 | Liner,split,straight,gw,推薦5190-2294 |
| 5062-3587 | Liner,splitless,single-t,推薦 5190-2293 |
| 5181-3315 | Liner,splitless,dbl-tpr,推薦5190-3983 |
| 5181-3316 | Liner,splitless,sngl-t,推薦 5190-2292 |
| 5183-4647 | Liner,split,low prsdrop,,推薦5190-2295 |
| 5183-4691 | Liner,split,straight,gw,推薦5190-3164 |
| 5183-4692 | Liner,split 25/PK推薦5190-3168 |
| 5183-4693 | Liner,splitless,st,gw，推薦5190-3163 |
| 5183-4694 | Liner,splitless,推薦5190-3167 |
| 5183-4695 | Liner,splitless no GW,推薦5190-3162 |
| 5183-4696 | Liner,splitless推薦5190-3166 |
| 5183-4701 | Liner,Split,Tpr,Gw,推薦5190-3165 |
| 5183-4702 | Liner,split,glswl,推薦5190-3169 |
| 5183-4705 | Liner,splitles,dubl-t,推薦5190-4007 |
| 5190-2296 | Liner, 2 mm dimpled，推薦5190-2297 |
化工儀器網