Tektronix TCP305泰克示波器高靈敏度電流探頭|泰克TCP305的產品介紹

在當今的電子產品設計中，精確的電流幅度測量是實現zui高電源功效的關鍵。 泰克的電流探頭可提供業界的測量靈敏度，可以測量低至1毫安的電流。這對于精確地測量小電流和頻率分量非常關鍵。的泰克示波器和電流探頭協同運行，可以自動將測量范圍擴展到數安培，大大縮短測量設置時間。

Features & Benefits

AC/DC Measurement Capabilities
DC – 100 MHz, Current Probe Amplifier （TCPA300） uses:

DC – 100 MHz, 30 A DC （TCP312）

DC – 50 MHz, 50 A DC （TCP305）

DC – 15 MHz, 150 A DC （TCP303）

DC – 50 MHz, Current Probe Amplifier （TCPA400） Uses:

DC – 2 MHz, 750*¹ A DC （TCP404XL） （500 A DC Continuous）

Automatic Scaling and Units*² – Oscilloscope On-screen Readout of Magnitude and Amps reduces Measurement Errors with No More Hand Calculations

AC/DC Input Coupling

Low Insertion Impedance reduces Device Under Test Loading

Split-core Construction allows Easy Circuit Connection

Status Indicators provide Visual Operating Status and Notification of Potential Error Conditions – Degauss, Probe Open, Overload, Not Terminated into 50 ?, Noncompatible Probe Type

Lower DC Drift and Noise allows Improved Low-level Current Measurements

Certified for use in U.S., Canada, and Europe. Complies with applicable IEC Standards.

Applications

Development and Analysis Solutions for Designers, Installers, and Service Personnel in ecomm, Data Comm, Computer, and Semiconductor Power Electronics Environments for:

Power Supplies （Switching and Linear）

Semiconductor Devices （SCRs, IGBTs, MOSFETs, CMOS, BJTs）

• Power Inverters/Converters
• Electronic Ballasts
• Industrial/Consumer Electronics
• Communications （Phone, Salite, Relay Stations）
• Motor Drives
• Transportation Systems （Electronic Vehicles, Electric Trains, Locomotives, Avionics）

Increased Performance and Simplicity

The TCP300 and TCP400 Series AC/DC current measurement family is a highly advanced current measurement system for today's current measurement needs. When connected to Tektronix oscilloscopes with TEKPROBE Level II, TekConnect （w/ TCA-BNC）, or TekVPI （w/ TPA-BNC） interfaces, current measurements and calculations are simple and easy.

*¹ Derated with duty cycle.
*² Requires a TDS TEKPROBE oscilloscope or a TekConnect oscilloscope with TCA-BNC.

MEETS TODAY'S AC/DC CURRENT MEASUREMENT APPLICATIONS

The TCPA300 amplifier, when used with TCP312, TCP305, or TCP303 probes, provides a wide range of current measurement capability and spans the gap between low-level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30 A, 50 A, and 150 A DC continuous. For even higher current levels, the TCPA400 amplifier with the TCP404XL current probe measures 500 A DC continuous and 750 A DC continuous, derated with duty cycle.

Higher frequency performance is available with the TCP312 w/TCPA300 providing ≥100 MHz bandwidth and a maximum current of 30 A DC.

MEASUREMENT ERRORS AND MANUAL CALCULATIONS ARE NOW A THING OF THE PAST

With this new series of current measurement tools, automatic control and on-screen scaling and units is provided for users of Tektronix TDS3000, TDS500, TDS600, TDS700, TDS5000, TDS6000, and TDS7000B Series oscilloscope systems （the DPO3000, DPO4000, and DPO7000 Series oscilloscopes, the TPA-BNC adapter is required）.

The TCP300/TCP400 current measurement systems seamlessly integrate with your TDS Series oscilloscope.

Even non-TEKPROBE systems can use the TCPA300/400 Series to make proper current measurements by simply multiplying the measured output voltage on the oscilloscope by the TCPA300/400 Series range setting.
 
 

如您想了解更多示波器相關知識，或是想試用 示波器 ，請與深圳市邦亞電子科技有限公司客服。如您想定期收到我司活動及*，請寫郵件告知我司。

更多“邦亞電子”優勢產品：
溫度校準器、數據采集器、安規測試儀、功率計、示波器、電子負載、電源、過程校準器、LCR數字電橋、
電信號校準器、壓力校準器、毫安回路校準器、電壓電流校準器、特殊應用儀器、萬用表、數據采集器