化工儀器網>產品展廳>環境監測儀器>煤炭行業專用儀器>定硫儀/測硫儀>CS600 CS600高精度碳硫測定儀

舉報評價

CS600 CS600高精度碳硫測定儀

具體成交價以合同協議為準

公司名稱 寧波市鄞州瑾瑞儀器設備有限公司
品牌
型號 CS600
產地
廠商性質 生產廠家
更新時間 2024/10/8 8:27:45
訪問次數 1751

產品標簽

black 0

在線交流發送詢價進入商鋪同類產品

聯系方式：金磊18958270202 查看聯系方式

聯系我們時請說明是化工儀器網上看到的信息，謝謝!

索取相關資料

公司介紹 主營產品

工欲善其事，必先利其器，歡迎選用璟瑞儀器！

璟瑞儀器儀表有限公司是一家專業銷售、設計、制造各類精密品管檢測儀器的高科技企業，公司始建于1999年，總部現設于長江三角洲重要外貿港口城市寧波，公司擁有一批*流的專業人才，致力于產品開發，市場推廣。

璟瑞儀器儀表有限公司是集機、電、儀于一體化的試驗機專業生產廠商--專業生產銷售產品質量檢驗設備。經過努力開發，本公司已有三十多個系列一千多個品種，適用于航天航空、車輛制造、科研單位、質檢機構、大專院校、材料開發、物性萬能材料試驗機、教學研究、品質管制、進料檢驗、科研開發、教學領域、生產領域：辦公椅、紙箱、紙板、皮革、環境試驗機、核能、冶金、家電、建材、包裝業、質檢、科研、金屬、塑料、橡膠、薄膜、土工布、紗線、纖維、紙張、電線電纜、彈簧、鋁塑復合管、人造大理石、水泥、包裝材料、膠帶等進行循環、疲勞、松馳、杯突、蠕變、拉伸、拉力、壓縮、彎曲、撕裂、剝離、剪切、穿刺、頂破、扭轉等力學性能測試和分析所*的。在非標準試驗設備方面，更有一套豐富的實踐經驗，適用國內外不同的領域的生產和測試。世界規范; ISO, BIFMA, ASTM, DIN, EN, GB ,JIIS, ANSI, UL,TAPPI, AATCC, IEC,VDE……均為所用。
我們堅持以產品質量可靠、企業信譽**、終生服務為奮斗目標和顧客至上的企業宗旨，并以同行業中*實惠的價格取得了輝煌的成就!堅持以人為本，不斷提高公司員工的積極性，創造性和服務性。做產品先做人，交客戶先交心，將企業文化凝聚在為客戶真誠服務的宗旨上。
公司的發展離不開員工的支持和客戶的關愛，璟瑞有限公司將繼續秉承“質量可靠、誠信為旨、開發**、至誠服務”的經營理念,“精益求精、追求上乘”的品質原則，以*大的熱誠和*積極的態度服務于廣大客戶。
以我之瑞(吉祥)，得你之璟(美玉)。

展開

實驗室通風柜,通風櫥,高低溫濕熱試驗箱,高低溫交變試驗箱,電子拉力試驗機

詳細信息 在線詢價

詳細說明:

CS600提供了一系列*的解決方案檢測碳和硫。當今的燃燒和紅外相結合的檢測技術使您能更準確、精確、使用方便靈活的剖析各種類型的金屬和無機材料。

Carbon and Sulfur in Steel, Nickel-Base, and Cobalt-Base Alloys

Instrument

CS600-Series

Sampling and Sample Preparation

Surface contamination on the sample can cause significant errors in the analytical data; therefore, care must be taken to ensure a clean, representative sample is analyzed. Solid

samples should be abraded with a clean file, rinsed in acetone and dried with warm air prior to analysis. Samples that cannot be abraded due to irregular shapes should be rinsed in a

suitable solvent such as acetone, and dried with warm air. Care

must be taken to remove all traces of the solvent. If a sample is porous, refrain from using solvents,

as it will be difficult to remove all traces of the solvent by drying. Refer to ASTM E1806 for additional sampling and sample preparation information.

Accessories

528-018 or 528-018HP Ceramic Crucibles （preheated）*; LECOCEL II （501-008） or

LECOCEL II HP （502-173） accelerator.

*Ceramic crucibles are baked in a muffle or tube furnace （LECO TF-10） at 1250oC for a minimum of

15 minutes, or at 1000oC for 40 minutes. The crucibles are removed from the furnace, allowed to cool for

1 to 2 minutes, and are transferred to a desiccator for storage. If the crucibles are not used within four hours, they should be re-baked.

Calibration

There are several suitable calibration samples available from LECO. Likewise, NIST, JK, JSS, and BCS are certified bodies that have a variety of certified reference materials （SRM/CRM） available as well. It is important that both high- and low-carbon ranges are calibrated. Single or multipoint calibration curves

can be utilized. Refer to the operator's instruction manual for details.

Method Parameters

Purge Time （seconds）:	1**
Delay Time （seconds）:	8**
Furnace Low Power （%）:	100
Furnace High Power （%）:	100
Furnace Ramp Rate:	0
	Carbon	Sulfur
Minimum Timeout （seconds）:	40	40
Comparator Level:	1.00	1.00
Significant Digits:	4 or 5	4 or 5
Integration Delay:	0	0

**For optimum analytical performance on samples with low carbon and

sulfur content （ 0.05%）, a purge time of 10 seconds and a delay time of

20 seconds is recommended.

CS600

Procedure

1. Prepare instrument for operation as outlined in the operator's instruction manual.

2. Determine blank.

a. Enter 1.0000 g weight into weight stack. b. Add ~1.5 g of accelerator to crucible.

c. Place the crucible on the furnace pedestal （or appropriate autoloader position if so equipped）, and analyze.

d. Repeat steps 2a through 2c a minimum of five times.

e. Enter blank following procedure outlined in the operator's instruction manual.

3. Calibrate.

a. Weigh ~1.0 g calibration sample into crucible and enter weight into weight stack.

b. Add ~1.5 g of accelerator on top of sample.

c. Place the crucible on the furnace pedestal （or appropriate autoloader position if so equipped）, and analyze.

d. Repeat steps 3a through 3c a minimum of five times for each calibration sample intended for calibration.

e. Calibrate using the procedure outlined in the operator's instruction manual.

4. Analyze Samples.

a. Weigh ~1.0 g sample into crucible and enter weight into weight stack.

b. Add ~1.5 g of accelerator on top of sample.

c. Place crucible on furnace pedestal （or appropriate autoloader position if so equipped）, and analyze.

Note: Some "solid" samples, notably nickel and/or cobalt-base alloys, are difficult to combust and may require additional accelerator. Likewise, reducing the sample to small chunks, chips, or pieces will facilitate combustion. For additional information on Carbon and Sulfur Determination using an Induction Furnace IR detection instrument, request LECO's Application Tips CD （209-050-055）.

Typical Results

Sample	Weight （g）	C %	S %	Sample	Weight （g）	C %	S %
LECO	1.0	0.605	0.0176	LECO	1.0	0.00089	0.00062
501-505		0.605	0.0172	502-348		0.00089	0.00067
Steel Ring		0.605	0.0169	Low C and S		0.00094	0.00068
0.607 % C		0.607	0.0171	Steel Pin		0.00095	0.00060
0.0172% S		0.607	0.0174	0.0009 % C		0.00085	0.00064
		0.605	0.0176	0.0007 % S		0.00085	0.00061
		0.606	0.0178			0.00090	0.00062
		0.604	0.0173			0.00090	0.00060
		0.606	0.0173			0.00090	0.00065
		0.605	0.0168			0.00089	0.00055
	X =	*0.606*	*0.0173*		X =	*0.00090*	*0.00062*
	s =	*0.001*	*0.0003*		s =	*0.00003*	*0.00004*
LECO	1.0	0.0375	0.0223	LECO	1.0	0.0414	0.0025
501-501		0.0380	0.0221	501-933		0.0414	0.0027
Steel Ring		0.0375	0.0222	Ni-Base Alloy		0.0413	0.0027
0.0377 % C		0.0377	0.0222	Chip Sample		0.0414	0.0028
0.0220 % S		0.0376	0.0223	0.042 % C		0.0415	0.0027
		0.0376	0.0222	0.003 % S		0.0413	0.0028
		0.0373	0.0221			0.0414	0.0028
		0.0376	0.0222			0.0415	0.0028
		0.0377	0.0223			0.0412	0.0027
		0.0377	0.0222			0.0414	0.0029
	X =	*0.0376*	*0.0222*		X =	*0.0414*	*0.0027*
	s =	*0.0002*	*0.0001*		s =	*0.0001*	*0.0001*

黄色视频不卡_午夜福利免费观看在线_亚洲国产精品999在线_欧美绝顶高潮抽搐喷水_久久精品成人免费网站_晚上一个人看的免费电影_国产又色又爽无遮挡免费看_成人国产av品久久久

CS600 CS600高精度碳硫測定儀

公司介紹 主營產品

詳細信息 在線詢價

相關分類

該廠商的其他產品

相關技術文章

對比欄

化工儀器網

提示

黄色视频不卡_午夜福利免费观看在线_亚洲国产精品999在线_欧美绝顶高潮抽搐喷水_久久精品成人免费网站_晚上一个人看的免费电影_国产又色又爽无遮挡免费看_成人国产av品久久久

CS600 CS600高精度碳硫測定儀

公司介紹主營產品

詳細信息 在線詢價

相關分類

該廠商的其他產品

相關技術文章

對比欄

化工儀器網

提示

客戶評價列表

詳細信息在線詢價