124-02水性，低V.O.C.，導電油墨和涂料
- 公司名稱 世聯博研（北京）科技有限公司
- 品牌 其他品牌
- 型號
- 產地
- 廠商性質 代理商
- 更新時間 2019/10/12 11:12:20
- 訪問次數 326
聯系方式：李勝亮18618101725 查看聯系方式
聯系我們時請說明是化工儀器網上看到的信息，謝謝!
細胞應力加載儀,3細胞打印機,NanoTweezer新型激光光鑷系統,PicoTwist磁鑷,美國NeuroIndx品牌Kuiqpick單細胞捕獲切割系統
| 產地類別 | 進口 | 應用領域 | 生物產業 |
|---|
124-02水性，低V.O.C.，導電油墨和涂料
說明：124-02是一種水性、低V.O.C.導電油墨和涂料，適合應用
通過凹版印刷或柔印。本產品具有與卡普頓、聚酯薄膜、玻璃等多種材料粘合的特點
表面。與傳統的導電材料不同，本產品具有很好的抗彎曲和折痕性能。一些
124-02的應用包括但不限于醫用電極、EMI/RFI屏蔽、聚合物厚膜
電路和薄膜開關。124-02是119-32的高粘度版本。
典型固化特性：
稠度稀液體
抗皺性佳
體積電阻率（Ω-cm）0.0001
片材電阻率，大值（Ω/sq./mil.）0.05
可焊性編號
水解穩定性優異
有效溫度范圍（℃）-55至+140
熱穩定性（攝氏度）達到175
覆蓋面積（平方英尺/加侖，干燥1.0英里）300.79
V.O.C.（克/升）60.8
建議處理和固化：在使用混合料之前，將填料重新懸浮。進一步變薄可能是
通過加入少量蒸餾水來完成。在各種基底上通過
在125℃下固化10分鐘。通過在
溫度范圍為50°C至150°C。建議終用戶通過實驗確定溫度和時間
適合個人應用。
貯存期：21°C下保存6個月。不允許冷凍。
安全和處理：用肥皂和水清洗皮膚。
124-02水性，低V.O.C.，導電油墨和涂料
124-02
WATERBORNE, LOW V.O.C., CONDUCTIVE INK & COATING
DESCRIPTION: 124-02 is a waterborne, low V.O.C., electrically conductive ink and coating suitable for application
by rotogravure or flexographic. This product features adhesion to Kapton, Mylar, glass, and a variety of other
surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some
applications for 124-02 include, but are not limited to, medical electrodes, EMI/RFI shielding, polymer thick film
circuitry and membrane switches. 124-02 is a higher viscosity version of 119-32.
TYPICAL CURED PROPERTIES:
Consistency Thin Liquid
Crease Resistance Excellent
Volume Resistivity (Ω-cm) 0.0001
Sheet Resistivity, max. (Ω/sq./mil.) 0.05
Solderable No
Hydrolytic Stability Excellent
Useful Temperature Range (°C) -55 to +140
Thermal Stability (°C) Good to 175
Coverage (sq. ft./gal. at 1.0 mils dry) 300.79
V.O.C.’s (grams/liter) 60.8
SUGGESTED HANDLING & CURING: Before using mix well to re-suspend filler. Further thinning may be
accomplished by adding small amounts of distilled water. Best properties are obtained on a variety of substrates by
curing for 10 minutes at 125°C. Good properties are also obtained on a variety of substrates by curing at
temperatures ranging from 50°C to 150°C.End user is advised to experimentally determine temperature and time
best suited for individual applications.
STORAGE: Shelf Life: 6 months at 21°C. DO NOT ALLOW TO FREEZE.
SAFETY & HANDLING: Wash with soap and water to remove from skin.
采購中心
化工儀器網